Panasonic sc-pt150 manual Using the radio, Manual tuning, Automatic presetting

OTHER OPERATIONS ENGLISH

Using the radio

Manual tuning

1To select “FM”.

	OR
(main unit)	(remote control)

2To select “MANUAL”.

(main unit)

3To select the frequency.

	OR
(main unit)	(remote control)

Press and hold [4 TUNING 3] until the frequency starts scrolling to start automatic tuning. Tuning stops when a station is found.

Presetting the channel

Remote control only

Up to 30 stations can be set for FM.

1.While listening to the radio broadcast

Press [ENTER].

2.While the frequency and “PGM” are flashing on the display

Press the numeric buttons to select a channel.

•To select a 2-digit number Example: To select 12,

•Alternatively, press [4, 3], then press [ENTER].

The station occupying a channel is erased if another station is preset to that channel.

Automatic presetting

1To select “FM”.

	OR
(main unit)	(remote control)

2Press and hold.

	OR	Release the
		button when
(main unit)	(remote	“FM AUTO” is
	control)	displayed.

The tuner tunes to the lowest frequency and starts to preset all the stations it can receive into the channels in ascending order.

•“SET OK” is displayed when the stations are set, and the radio tunes to the last preset station.

•“ERROR” is displayed when automatic presetting is unsuccessful. Preset the channels manually (\ see left).

Selecting the preset channels

1To select “FM”.

2To select the channel.

TO

•Alternatively, press [4, 3].

When a stereo FM broadcast is being received, “ST” lights in the display.

If noise is excessive in FM

Main unit only

Press and hold [–FM MODE] to display “MONO”.

Press and hold [–FM MODE] again to cancel the mode.

The mode is also cancelled when you change the frequency.

RQTX0029

28

RQT8043