ATTACHING A MODULE SLEEVE
Your base kit comes with a single module sleeve. The optional expansion kits allow you to add more module sleeves.
WARNING: Do not attach more than four module sleeves with modules. The excessive weight can cause the equipment to fall from the wall.
To attach a module sleeve, follow these steps and refer to Figure 2.
1.Attach the module sleeve to the wall bracket by inserting the four tabs on the module sleeve into the four openings on the wall bracket.
2.Remove the two
You must remove the cover plate on the module sleeve before adding additional module sleeves.
LOCATION B
LOCATION A
LOCATION B
Figure 2. Module Sleeve Attachment
REMOVING A COVER PLATE
To add additional module sleeves, you must remove the cover plate from the supplied module sleeve. Refer to Figure 3.
Figure 3. Cover Plate Removal
5 |