Important Safeguards and Warnings, Description

300 W. Pontiac Way,

Clovis, CA 93612-5699

USA

In North America & Canada:

Tel (800) 289-9100

FAX (800) 289-9150

DataFAX (800) 289-9108

International Customers:

Tel +1 (559) 292-1981

FAX +1 (559) 348-1120

DataFAX +1 (559) 292-0435

Pelco Online http://www.pelco.com

U® L LISTED

C421M-D (2/00)

HT10 Series

Liquid-Cooled Enclosure

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1.Installation and servicing should only be done by qualified service personnel and conform to all local codes.

2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo- sure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture.

3.Only use replacement parts recommended by Pelco.

4.After replacement/repair of this unit’s electrical components, conduct a resistance mea- surement between line and exposed parts to verify the exposed parts have not been con- nected to line circuitry.

5.The installation method and materials should be capable of supporting four times the weight of the enclosure, pan/tilt, camera and lens combination.

6.Use or mount this enclosure so that it is positioned not less than 91 degrees and not more than 180 degrees when considering 12 o’clock to be 0 degrees and 6 o’clock to be 180 degrees.

7.Only Nema 3R liquid tight conduit should be used in all outdoor applications.

The product and/or manual may bear the following marks:

	This symbol indicates that danger-
	ous voltage constituting a risk of
	electric shock is present within
	electric shock is present within	C A U T I O N :
	this unit.	C A U T I O N :
	this unit.
		RISK OF ELECTRIC SHOCK.
	This symbol indicates that there	DO NOT OPEN.
	are important operating and main-
	tenance instructions in the litera-
	ture accompanying this unit.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

DESCRIPTION

The products in the HT10 Series are liquid-cooled enclosures designed for high temperature applications.

The stainless steel enclosure features two separate double-walled cooling jackets that protect the camera and lens and other sensing devices housed within the unit.

Models

HT10V	High temperature enclosure with Vycor® window; window suitable in
	temperatures up to 2500°F (1371°C)
HT10V/RC	Same as the HT10V except Vycor window has an infrared reflective coating
	for environments where high levels of radiant heat are encountered; window
	suitable in temperatures up to 1832°F (1000°C)

USA