Panasonic SC-HT95 Disc information, Disc handling, Gettingstarted, If the surface is dirty

Disc information

∫Discs that can be played

Disc type	Logo	Indication used in
		instructions
DVD-Audio		[DVD-A]
DVD-Video		[DVD-V]

DVD-R

Audio CD [CD]

(Including CD-R/RW and discs recorded with MP3)

Video CD [VCD]

∫Discs that cannot be played

PAL discs (the audio on DVD-Audio can be played), DVD-ROM, DVD-RAM, CD-ROM, CDV, CD-G, iRW, DVD-RW, CVD, SVCD, SACD, Divx Video Discs and Photo CD.

∫Region Management Information

(DVD-Video only)

This unit responds to the Region Management Information recorded on DVD-Video. You cannot play the disc if the region number on the DVD-Video does not correspond to the region number on the unit.

Read the disc’s instructions carefully.

[For\U.S.A.,\Canada,\and\units\with\PX\printed\on\the\outer\packaging[

≥The region number of this unit is “1”.			1
≥You can play discs with labels con-	1	ALL
taining the region number “1” and			2	4
“ALL”.
[For\Latin\America[
≥The region number of this unit is “4”.	4		1
≥You can play discs with labels con-
		ALL	2	4
taining the region number “4” and

“ALL”.

∫Playing DVDs and Video CDs

The producer of these discs can control how they are played so you may not always be able to control play as described in these operat- ing instructions. Read the disc’s instructions carefully.

∫CD-R and CD-RW discs

This unit can play CD-DA (digital audio) and video CD format audio CD-R and CD-RW that have been finalized (a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW) upon com- pletion of recording.

It may not be able to play some CD-R or CD-RW due to the condition of the recording.

∫DVD-R discs

Panasonic DVD-R recorded and finalized on a Panasonic DVD video recorder are played as DVD-Video on this unit.

It may not be possible to play these discs in all cases due to the type of disc or condition of the recording.

Disc handling

Do not use irregularly shaped discs, such as heart-shaped.

(These can damage the unit.)

∫How to hold a disc

Do not touch the recorded surface.	Gettingstarted
∫ If the surface is dirty

Wipe it with a damp cloth and then wipe dry.

∫If the disc is brought from a cold to a warm

environment, moisture may form on the disc

Wipe with a soft, dry, lint-free cloth before using the disc.

∫Handling precautions

≥Do not write on the label side with a ball-point pen or other writing instrument.

≥Do not use record cleaning sprays, benzine, thinner, static electric- ity prevention liquids or any other solvent.

≥Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.)

≥Do not use scratch-proof protectors or covers.

≥Do not use discs printed with label printers available on the market.

∫Do not place or store discs in the following

places

≥Locations exposed to direct sunlight ≥Humid or dusty locations

≥Locations directly exposed to a heat vent or heating appliance

∫To prevent damage

≥Load only 1 disc per tray.

≥Load discs as shown in figure.

8cm

(3q)

12cm

(5q)

≥An adaptor is not needed with 8 cm (3q) discs (singles). ≥Set the system on a flat, level surface.

Do not set it on top of magazines, inclined surfaces, etc.

≥Do not move the system while trays are opening/closing, or when loaded.

≥Do not put anything except discs in trays.

≥Do not use cleaning discs or discs which are badly warped or 5 cracked.

RQT6183