Pelco C2461M-A manual Important Safeguards and Warnings, Regulatory Notices

Page 3

IMPORTANT SAFEGUARDS AND WARNINGS

1.Installation and servicing should be done only by qualified service personnel and conform to all local codes.

2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and must not be installed where exposed to rain and moisture.

3.Use only installation methods and materials capable of supporting four times the maximum specified load.

4.Use stainless steel hardware to fasten the enclosure to outdoor surfaces.

5.To prevent damage from water leakage when installing an enclosure outdoors, apply sealant around the bolt holes between the enclosure and mounting surface.

C A U T I O N

Heater elements could be hot! When camera power is on, use caution when adjusting the camera.

REGULATORY NOTICES

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

C2461M-A (7/03)

3

Image 3
Contents In-Ceiling Mount INSTALLATION/OPERATIONContents Regulatory Notices Important Safeguards and WarningsWelcome Attach Directly to a Wall/Ceiling Install the Back BOXInstall the Back BOX Remove the Lower DomeAttach to a 4S Deep Electrical Box Installation to 4S Deep Electrical BoxPlate as a template Install in a Ceiling TileCheck Heater Jumper Install the Camera ModuleInstall and Position the Camera ZOOM/FOCUS Make Camera SettingsDigital Slow Shutter DSS AGC Automatic Gain ControlBLC Back Light Compensation Vertical Phase Adjustment 24 VAC Operation only How to Adjust the Phase ControlVarifocal Lens Auto Iris Level Adjustment Dome and Trim Ring Installation Reinstall the Dome and Trim RingBackbox SpecificationsWarranty Warranty and Return InformationISO9001
Related manuals
Manual 16 pages 3.83 Kb

C2461M-A specifications

The Pelco C2461M-A is a high-performance camera designed for a variety of surveillance applications, offering outstanding features that make it a preferred choice among professionals in security and monitoring. This camera is known for its compact design, delivering excellent image quality and reliability, suitable for both indoor and outdoor settings.

One of the main features of the Pelco C2461M-A is its image sensor, which provides high-resolution video capabilities. The camera supports up to 1080p HD resolution, ensuring crisp and clear images even in low-light conditions. This is achieved through advanced digital signal processing, which enhances image clarity and reduces noise, a crucial factor for effective surveillance.

The C2461M-A is equipped with a powerful infrared (IR) LED illumination system, allowing it to capture clear images even in complete darkness. The IR range can extend up to 30 meters, making it ideal for monitoring large areas without the need for additional lighting. This feature is particularly beneficial for nighttime surveillance, ensuring that critical details remain visible regardless of the ambient lighting conditions.

Another significant aspect of the Pelco C2461M-A is its robust construction. The camera is designed to withstand harsh environmental conditions, with an IP66 rating for water and dust resistance. This makes it suitable for outdoor deployment in various weather conditions, providing durability and longevity in the field.

In terms of connectivity, the C2461M-A supports various protocols such as ONVIF, enabling seamless integration with different video management systems. This compatibility allows for easy setup and integration into existing security infrastructures, enhancing the flexibility and usability of the system.

Additionally, the camera features advanced analytics capabilities, including motion detection and tampering alerts. These features enhance situational awareness and ensure that users are promptly alerted to any suspicious activities, improving the overall effectiveness of surveillance operations.

Overall, the Pelco C2461M-A stands out in the crowded surveillance market due to its impressive features, including high-resolution image capture, excellent low-light performance, robust construction, and compatibility with various systems and protocols. It is an ideal choice for those looking to enhance their security measures with a reliable and efficient surveillance solution.