Regulatory Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

You may also ﬁnd helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Ofﬁ ce, Washington D.C. 20402.

Changes and modiﬁcations not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

WARNING: This product is sensitive to Electrostatic Discharge (ESD). To avoid ESD damage to this product, use ESD safe practices during installation. Before touching, adjusting or handling this product, correctly attach an ESD wrist strap to your wrist and appropriately discharge your body and tools. For more information about ESD control and safe handling practices of electronics, please refer to ANSI/ESD S20.20-1999 or contact the Electrostatic Discharge Association (www.esda.org).

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

C3426M-A (5/07)

C3426M-A (5/07) specifications

The Pelco C3426M-A is a high-performance pan-tilt-zoom (PTZ) camera designed for versatile surveillance applications in a range of environments. Introduced in 2007, it has garnered attention for its combination of advanced technologies and robust build quality, making it an ideal choice for both indoor and outdoor security needs.

One of the key features of the C3426M-A is its 26x optical zoom lens. This powerful zoom capability allows the camera to capture high-quality images from significant distances, making it suitable for perimeter security, monitoring large areas, or focusing on specific objects or events. Coupled with advanced digital zoom options, the camera ensures that even fine details can be captured clearly without sacrificing image quality.

The camera utilizes Pelco’s proprietary technologies to enhance its performance in varying light conditions. With a wide dynamic range and low lux capabilities, it delivers exceptional image clarity in both bright and low-light environments. This adaptability is crucial for surveillance scenarios where lighting conditions can change rapidly.

In terms of build quality, the C3426M-A is designed to withstand harsh environmental conditions. Its rugged housing is weather-resistant, making it suitable for outdoor installations. This durability ensures reliable operation in challenging weather conditions, including rain, snow, and extreme temperatures.

The camera is also equipped with advanced motion detection and programmability features. Users have the ability to set specific areas of interest and configure the camera to respond to motion, which helps to minimize false alarms and optimize monitoring efficiency. The flexibility of programmable presets allows operators to focus on critical areas, enhancing overall surveillance strategy.

Networking capabilities are another highlight of the C3426M-A. Featuring support for various video formats, it easily integrates into existing security systems. The camera can be controlled remotely, allowing for real-time monitoring and adjustments from anywhere, which is particularly advantageous for large facilities or multi-site operations.

In summary, the Pelco C3426M-A (5/07) stands out as a reliable and sophisticated PTZ solution. Its powerful optical zoom, weather-resistant design, advanced imaging technologies, and robust networking capabilities make it an excellent choice for a wide range of security and surveillance applications. Whether for commercial, industrial, or institutional use, this camera offers the flexibility and performance required to meet modern security challenges.