Pelco dx8100 manual Change Your Passwords Dialog Box

5. Click “Change my password.” The “Change your password” dialog box opens.

Figure 8. Change Your Passwords Dialog Box

6.Enter the new password for the DX8100ADM account and then click the Change Password button. A prompt is not displayed advising you that the password is been changed. Instead, the dialog box closes and the User Accounts “Pick a task” dialog box is redisplayed.

Passwords are case-sensitive and should contain a mixture of alphabetic and numeric characters between six and ten characters in length. NOTE: Remember or write down this password and keep it in a secure place.

7.To log on to the DX8100 server application, do one of the following:

•To manually log on, go to step 8.

•To enable automatic log on, refer to Enabling Automatic Logon on page 12.

8.To manually log on to the server application:

a.Close the User Accounts dialog box, and then restart the DX8100. The logon message dialog box opens.

b.Click OK. The Log On to Windows dialog box opens.

Figure 9. Log On to Windows Dialog Box

c.Enter the new password and then click OK. The DX8100 server application starts.

C2641M-C (7/09) 11