American Standard Proximity Faucet Installation, Roughing-in Dimensions, Tools Required Fig

Fig. 1

Roughing-in Dimensions

			6-1/8"	11-1/8"	5-1/8"	9-3/4"
			(155mm)	(284mm)	(130mm)	(248mm)
	141mm	131mm		7"
		(5-1/8)			6-1/8"
			MOUNTING	(179mm)
	(5-1/2)
			SURFACE		(155mm)
81mm	49mm	32mm (1-1/4)	49mm		49mm
	(2)		(2)		(2)
(3-3/16)		125mm
		(4-7/8)
			381mm		381mm
	114mm		(15)		(15)
	(4-1/2)
381mm			GENERAL DESCRIPTION:
(15)
	500mm	1524mm	Electronic faucet with proximity operation. Vandal resistant solid			brass
		(60)	construction single post	mounting. Operates	on DC (battery) or AC
	(20")
3/8" COMP.			permanent power. In-line strainer for solenoid is integral. Single inlet 3/8
			compression, built-in checks, and flexible stainless steel 15" reach inlet hose
			for spout connection.

TOOLS REQUIRED; Fig. 2

1Channel Locks

2Adjustable Wrench

3Plumbers' Putty or Caulking

4 Phillips Screwdriver

5 Flat Blade Screwdriver

6 Electric Drill & 1/4" Drill Bit

7 Tape Measure

INSTALLATION

1INSTALL SPOUT ASSEMBLY; Fig. 1

	Turn off hot and cold water
CAUTION
	supplies before beginning

1.(Optional) Assemble DECK PLATE (1) and PUTTY PLATE (2) to FAUCET BODY (3) with SCREW (4).

Fig. 1.

2.Insert WIRES (5), FLEX HOSE (6) and SPOUT

SHANK (7) through center hole of mounting surface.

Fig. 1a.

3.Assemble "C" WASHER (8), STAR WASHER (9) and LOCKNUT (10) onto threads of SPOUT SHANK

(7) from underside of mounting surface. Fig. 1b.

4.Align FAUCET (3) and tighten LOCKNUT (10). If using DECK PLATE (1) hand tighten DECK PLATE SPIN NUTS (11) to secure FAUCET (3) to mounting surface. Fig. 1b.

Fig. 2
1		2
3	7
		6
4	10'
5

Fig. 1
		4
		3
2
		1
Fig. 1a		10		Fig. 1b
		7	11
		5
1	2
		7
			8	9
		6

2