American Standard ASME A112.19.4M 7182.001/803 Top Mount, 7182.001/803 Undercounter Mount

CHANDLER™ ISLAND SINK

AMERICAST®

7182.001/803 Top Mount

FINISHED WALL			(3) 38mm (1-1/2)
OR SPLASHBACK
	HOT		DIA. HOLES TYP.
		COLD
2" (51mm)	2"	2"
	(51mm)	(51mm)
OPTIONAL
				2"
				(51mm)
			7182.001
3-1/2"			(1 HOLE)	8-13/16"
(89mm)
				(229mm)
DIA.
*CUTOUT		C/L		15"
				(381mm
NOTE
1" (25mm)			3/4"
RAD.TYP.	8-1/4"
			(19mm)
	(210mm)
		16-1/2"
		(419mm)
	SEALING	1/2"	COUNTERTOP
	COMPOUND	(13mm)	(BY OTHERS)
8"
(203mm)
5-3/4" (146mm)			36" (914mm)
			SUGGESTED
1-1/2" O.D. TAILPIECE
				FINISHED
				FLOOR

7182.001/803 Undercounter Mount

	FINISHED WALL				(3) 38mm (1-1/2)
	OR SPLASHBACK
			HOT		DIA. HOLES TYP.
				COLD
		2" (51mm)	2"	2"
			(51mm)	(51mm)
		OPTIONAL
						2"
						(51mm)
					7182.001
		3-1/2"			(1 HOLE)	8-13/16"
		(89mm)				(229mm)
		DIA.
		*CUTOUT		C/L			15"
					MOUNTING CLIP		(381mm)
		NOTE			(SEE DETAIL)
		1" (25mm)			3/4"
		RAD.TYP.	8-1/4"
					(19mm)
			(210mm)
				16-1/2"
				(419mm)
DETAIL OF MOUNTING CLIP
(KIT No.791003-100)
BRASS	1/2"
INSERT	(13mm)	SEALING			COUNTERTOP
SINK	MIN.
		COMPOUND			(BY OTHERS)
	CLIP
	MACH.	8-1/2"
	SCREW	(216mm)
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
		5-3/4" (146mm)			36" (914mm)
					SUGGESTED
		1-1/2" O.D. TAILPIECE
						FINISHED
						FLOOR

NOTES:

*FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND COUNTERTOP SUPPORTS.

NOTES:

*TEMPLATE PROVIDED WITH MOUNTING KIT 791003-100 FOR UNDERCOUNTER, INSTALLATION AND COUNTERTOP CUTOUT.

FITTINGS AND UNDERCOUNTER MOUNTING KIT NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND COUNTERTOP SUPPORTS.

7182.000 Top Mount

FINISHED WALL	HOT	COLD
	2"	2"
OR SPLASHBACK
	(51mm)	(51mm)
2" (51mm)		2"
OPTIONAL		(51mm)
(3) 1-1/8" (29mm)
DIA. HOLES TYP.

7182.000 Undercounter Mount

FINISHED WALL	HOT	COLD
	2"	2"
OR SPLASHBACK
	(51mm)	(51mm)
2" (51mm)
OPTIONAL
		2"
(3) 1-1/8" (29mm)		(51mm)
DIA. HOLES TYP.

3-1/2"				6-3/16"
(89mm)				(157mm)
DIA.
*CUTOUT				12-3/8"
		C/L		(314mm)
NOTE
1" (25mm)
RAD.TYP.	8-1/4"			3/4"
				(19mm)
	(210mm)
		16-1/2"
		(419mm)
	SEALING		1/2"	COUNTERTOP
	COMPOUND			(BY OTHERS)
			(13mm)
8"
(203mm)
5-3/4" (146mm)

DETAIL OF MOUNTING CLIP

(KIT No.791003-100)

BRASS 1/2"

INSERT (13mm)

SINK MIN.

CLIP MACH.

SCREW

REFER TO INSTRUCTIONS PROVIDED WITH KIT FOR ADDITIONAL INFORMATION

3-1/2"			6-3/16"
(89mm)			(157mm)
DIA.
*CUTOUT			12-3/8"
	C/L	MOUNTING CLIP	(314mm)
NOTE		(SEE DETAIL)
1" (25mm)
RAD.TYP.		3/4"
		(19mm)
	16-1/2"
	(419mm)
SEALING		COUNTERTOP
COMPOUND		(BY OTHERS)
8-1/2"
(216mm)

36" (914mm)

SUGGESTED

1-1/2" O.D. TAILPIECE

FINISHED

FLOOR

5-3/4" (146mm)

36" (914mm)

SUGGESTED

1-1/2" O.D. TAILPIECE

FINISHED

FLOOR

NOTES:

*FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND COUNTERTOP SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME Standard A112.19.4

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

NOTES:

*TEMPLATE PROVIDED WITH MOUNTING KIT 791003-100 FOR UNDERCOUNTER, INSTALLATION AND COUNTERTOP CUTOUT.

FITTINGS AND UNDERCOUNTER MOUNTING KIT NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND COUNTERTOP SUPPORTS.

	G48
© 2008 AS America Inc.		Revised 2/08