SkyLink PS-103 manual Introduction, Power UP the Wireless Motion Sensor, Installation

Page 1

Wireless Motion Sensor

Model PS-103

1. INTRODUCTION

The Motion Sensor is designed to monitor movement around / within your house. Once motion is detected, the control panel will either alert you or alarm will be triggered.

In this package, you should find a motion sensor, ball-head joint, and screws.

2 pcs 3 x 18 screws

Ball-head joint

(Included)

Motion Sensor

Please follow the instructions below to set up the motion sensor.

2. POWER UP THE WIRELESS MOTION SENSOR

Insert a 9V alkaline battery (Not included) to the motion sensor and its LED will be on for 2 seconds.

Test

Button

LED underneath the lens

3. LEARN SENSOR TO MA SERIES CONTROL PANEL

Control Panel will not respond to Motion Sensor unless:

1)The Control Panel is armed in Away Mode, it will respond to Motion Sensors in Zones 1, 2 and 3;

2)Motion Sensor is programmed into Zone 4, which is a dedicated Alert Zone.

It is important to select which zone you program the motion sensor to.

-If you setup the motion sensor for security purpose where it will cause an alarm when an intruder break-in, you should program the Motion Sensor to either Zone 1, 2 or 3. DO NOT program to Zone 4 as it is a dedicated Alert Zone, sensors in this zone will not cause an alarm.

-If you setup the motion sensor for alert purpose where it does not need to cause an alarm when motion is detected, you should program the Motion Sensor to Zone 4. DO NOT program to Zone 1, 2, or 3 as Motion Sensor in these zones will not provide any alert beeping indication.

Therefore, please select which zone you need to program the Motion Sensor before proceeding further.

Step 1:

Press and hold the Learn Button on the Control Panel for 3 seconds. Control Panel beeps once and you may release the Learn Button.

12V

 

 

DC

 

 

INPUT

 

 

MUTE

 

 

LEARN

Press 3 sec.

Long Beep

ALERT

 

 

CHIME

 

 

OFF

 

 

Step 2:

Press the zone button (1, 2, 3, or 4) once, for which you want to program the sensor to. The selected Zone LED will flash.

3. LEARN SENSOR TO MA SERIES CONTROL PANEL (CONT)

Step 3:

Activate the Motion Sensor by pressing the test button on the back of the Motion Sensor.

Press

Control Panel long beep

Test Button

Zone LED flashing OFF

Step 4:

You will hear a long beep and the zone LED stops flashing. The sensor is now programmed to the Control Panel.

Note:

You may program up to 4 sensors to one zone.

Zone 4 is an alert zone, sensors in this zone is for alert purpose ONLY and will not trigger the alarm.

Test Sensor

After programming the motion sensor to the Control Panel, you may place the Control Panel in Test Mode to verify the communication between the Motion Sensor and the Control Panel.

Step 1:

Remove the adapter and all batteries from the Control Panel.

Step 2:

Press and hold the "Mute" button and plug the AC adapter back into the Control Panel. All LED indicators will be ON, you may release the "Mute" button. Control Panel is now in Test Mode, and it will respond to all Motion Sensors and other sensors.

Step 3:

Place the Alert Notification Switch to "Alert" and you may now activate the Motion Sensor by pressing the test button on the back of the Motion Sensor. You may also move in front of the Motion Sensor. Please refer to "Walk Testing" for detail information on how to walk test the Motion Sensor.

Step 4:

Control Panel will respond by flashing the zone LED and alert beeping, according to the zone number. 1 beep for zone 1, 2 beeps for zone 2 etc. The beeping will last around 15 seconds for each activation.

After testing, unplug the AC adapter and plugs it back into the Control Panel, it will back to Normal Operating Mode.

4. INSTALLATION

You may now close the battery cover and re-insert the screw. Mount the ball-head joint on the wall with screws provided. Slide the back of the sensor into the ball-head joint. The mounting angle can be adjusted.

Walk Testing

Walk test should be performed after the motion sensor is mounted. Walk in the detected area, if motion is detected, a red light inside the sensor will glow. If the red light does not glow, motion has not been detected and you may need to re-position the sensor. Ensure you walk test all the locations that you would like the motion sensor to cover.

Press the zone button Zone LED flashing

Image 1
Contents Installation Power UP the Wireless Motion SensorIntroduction Learn Sensor to MA Series Control PanelCustomer Service WarrantySensor Failure / LOW Battery Indication Other MA Series Accessories

PS-103 specifications

SkyLink PS-103 is a cutting-edge satellite communication device designed for reliable and high-speed connectivity in remote areas where traditional internet services are often lacking. As a product tailored for both recreational and professional users, the PS-103 ensures seamless communication for business operations, emergency services, and adventure enthusiasts alike.

One of the standout features of the SkyLink PS-103 is its advanced satellite technology. Operating on multiple frequency bands, it delivers superior performance in diverse environments. The device is equipped with a powerful antenna that enables it to maintain a stable connection with satellites, even in challenging weather conditions. This results in consistently high data speeds, allowing users to stream, video conference, and access cloud services effectively.

The PS-103 boasts a user-friendly interface, making it accessible for individuals with varying levels of technical expertise. Its plug-and-play design allows for quick setup and immediate use, ensuring that users can connect and communicate within minutes of unboxing. The device's built-in Wi-Fi hotspot capability transforms it into a central hub, enabling multiple devices to connect simultaneously, which is particularly useful for teams working in remote locations.

One of the key characteristics of the SkyLink PS-103 is its rugged and durable design. Built to withstand harsh environmental conditions, this device features weather-resistant housing, ensuring longevity and reliability. Additionally, it is lightweight and portable, which means it can easily be transported for hiking trips, field operations, or disaster response efforts.

In terms of power efficiency, the PS-103 incorporates sustainable technologies that maximize battery life, making it an ideal choice for extended outdoor use. Furthermore, the device supports various power sources, including solar panels, providing flexibility in remote settings where traditional power supply may not be available.

Security is another crucial aspect of the SkyLink PS-103. It implements robust encryption protocols to safeguard user data and ensure secure communications, which is essential for business applications and sensitive information exchanges.

In summary, the SkyLink PS-103 is a versatile and powerful satellite communication device that excels in delivering reliable connectivity in any environment. With its advanced technology, user-friendly features, and durable design, it is an invaluable tool for anyone requiring dependable communication in remote areas. Whether for personal adventure or professional use, the PS-103 stands out as a leading choice in satellite communications.