SkyLink 18TR manual Introduction, Installation, Trouble Shooting

Page 1

Skylink® Garage Door

 

Remote Control

Model 18TR

1. INTRODUCTION

In this package, you will find a keychain transmitter with 12V alkaline battery, a garage door receiver, a red / black wire and a mounting bracket.

 

Garage

 

Door

Mounting

Receiver

Bracket

 

Keychain

 

Transmitter

Red/Black Wire

(Battery inside)

 

2. INSTALLATION

The following instructions will show you how to install the receiver. After installing, the keychain transmitter (already programmed to the receiver) can be used to operate your garage door opener.

You need to locate 2 things inside your garage to install the receiver:

1)the wall-mounted door control;

2)an electrical outlet, select an electrical outlet different from the one already connected to the power cord of the garage door opener to reduce the chance of interference. The further distance between the receiver and the garage door opener, the less interference between 2 devices.

Note: The length of the red/black wire is 20ft, so the receiver must be plugged into an electrical outlet that is within 20ft of the wall mounted door control. If there is no electrical outlet within 20ft of the wall mounted door control, an extension cord can be used for temporary installation.

Wall Mounted

Remove power cord of garage

door opener before installation.

Door Control

 

Electrical

 

Outlet

 

 

Unplug the power cord of your garage door opener before

 

WARNING

installation to ensure power is not connected.

 

1Remove the wall-mounted door control from the wall by removing the screws. Connect the stripped ends of the Red/Black wire to the 2 terminals (2 screws) on the back of the wall mounted door control. (Polarity does not matter.)

 

Existing

 

wires

 

Note: There should be another

 

pair of wires connected to the 2

 

terminals already. Do not remove/

Red /

disconnect these existing wires.

Black wire

 

Note: If you see no screws mounting the wall mounted door control, the screws are probably underneath the front cover. Remove the front cover by pressing onto the tabs on top of the cover.

Remove front cover first

2. INSTALLATION (CONT)

2Plug in the connector end of the Red/Black wire to the 18R receiver. Note the orientation of the male & female connector.

3Plug the receiver into an electrical outlet inside the garage.

The red light on the receiver should be on after being plugged into an electrical outlet.

Existing wires connected to garage door opener. (Do not remove)

RECEIVER

RED/BLACK WIRE

Note: Alternative wiring options are available, the receiver can be connected directly to the opener’s motor. Please contact customer service for further information regarding alternative wiring options.

4Re-connect the power cord of the Garage Door Opener.

5The Left button on the transmitter has been programmed to operate the receiver. Activate this button will trigger the receiver therefore opens the garage door.

3.TROUBLE SHOOTING

Q:Door opener does not react after pressing the button on the transmitter ?

A:- Ensure when the button on the transmitter is pressed, the red light on the transmitter comes on. Otherwise, check if the battery is inserted properly.

-The left button on the transmitter should be pressed, not the right button

-If the red light on the receiver flashes when you press the appropriate

button on the transmitter, but the door opener does not respond, please ensure the red/black wire is successfully connected from the receiver to the wall mounted door control.

-Ensure the wires that are previously connected to the wall mounted door control are not loose.

-Ensure the transmitter has been programmed to the receiver. Refer to section 4 for how to program a transmitter to the receiver.

4. PROGRAM A TRANSMITTER TO THE RECEIVER

The transmitter in this kit has been programmed to the receiver in the factory. You need to do the programming only if you add additional transmitters to the receiver.

Button A

Button B

Learn

Button

Different wall-mounted door controls

Image 1
Contents Trouble Shooting InstallationIntroduction Program a Transmitter to the ReceiverCustomer Service WarrantyBattery Additional Receiver

18TR specifications

SkyLink 18TR is an advanced satellite communications system designed to deliver high-speed internet and data services across diverse regions. By leveraging cutting-edge technologies and robust engineering, the SkyLink 18TR stands out in the competitive landscape of satellite communication solutions.

One of the primary features of the SkyLink 18TR is its high throughput capability. With a bandwidth capacity that meets the demands of both individual and enterprise users, it ensures seamless connectivity even in remote locations. The system utilizes a multi-band approach, operating efficiently in Ku-band and Ka-band frequencies, thereby providing greater flexibility and enhanced performance.

SkyLink 18TR integrates advanced signal processing technologies, ensuring that data transmission is not only fast but also reliable. This includes adaptive coding and modulation schemes that optimize bandwidth utilization based on varying signal conditions. Consequently, users experience lower latency and improved overall service quality, which is crucial for applications such as video conferencing, streaming, and cloud computing.

Another key characteristic of the SkyLink 18TR is its scalability. As user demand increases, the system can easily expand its capacity without significant infrastructure changes. This makes it a suitable solution for growing businesses and industries that require consistent and reliable connectivity over time.

The geographical coverage of SkyLink 18TR is extensive, making it suitable for a range of applications including maritime, aerospace, and remote land operations. The system is designed for both fixed and mobile platforms, ensuring that users can stay connected whether on land, at sea, or in the air.

In addition to performance and coverage, the SkyLink 18TR is engineered for durability and resilience. Constructed with rugged materials that can withstand extreme weather conditions, it guarantees consistent service reliability. This is particularly beneficial for sectors such as emergency services and disaster recovery operations, where timely communication is vital.

SkyLink 18TR's user-friendly interface simplifies the management of services, allowing users to monitor performance, usage, and connectivity status in real-time. With its seamless integration into existing IT infrastructures, it serves as a powerful tool for organizations looking to enhance their operational efficiency.

In summary, SkyLink 18TR represents a significant advancement in satellite communications, combining high throughput, flexibility, scalability, and robustness to meet the evolving needs of its users. Whether for individual use or large enterprises, SkyLink 18TR is positioned to deliver exceptional communication capabilities in an increasingly connected world.