Sony LCD VPL-X2000U Projector Configuration

Sony LCD Compatible Installation	Configuration and Connections

Sony LCD VPL-X2000U Projector Configuration

Verify that the System 8/10 PLUS is already configured for the Sony LCD VPL- X2000U projector. The general setup is explained on page 3-4 and the switch settings for the projector are repeated below.

1. Use a small screwdriver to remove the access cover from the System 8/10 PLUS front panel. See bottom of page 3-3. The label on the back of the access cover also has the configuration information.

__________ Before changing anything, remove the AC power cord to the System 8/10 PLUS

to verify that the main power is OFF; also turn the projector power OFF.

2. Set the switches as follows:

Config

Model

Rotary Switches

Cable

SW15 Settings

Comm

RS1

RS2

RS3

RS4

J2/J3

Adapter

✔

Sony VPL-X2000U

↑

↓

↑

↓

↑

↓

↑

↓

26-483-01

_RS5 is for RGB switching delay. See page 3-4 for more information on switch functions.

RS2

RS5 RS2 RS1

RS1

SW15 DIP Switch

RS3 RS4

RS3

RS4

Configured For:

RS-232

3.Use a grease pencil (or other rub-off marker) to mark the space on the label next to “Sony LCD”.

4.Locate the switcher’s Address DIP switches on the rear panel, lower right. Unless this is part of a master/slave system, set #3 and #5 to the up position and the others down. See illustration to the left.

Use the illustration on the next page to do the following steps.

5. Verify that the IR Comm Adapter is configured correctly (refer to the IR Comm Adapter User’s Guide). Connect the 3.5 mm male plug end of the supplied cable into the “OUT” jack of the IR Comm Adapter. Connect the other end of the cable into the “CONTROL S IN” port of the projector. If a hardwired remote or host controller is being implemented, connect that device to the “IN” jack of the IR Comm Adapter.

6.Connect the CC-50' (or CC-100') cable from the 9-pin male connector of the IR Comm Adapter to the 15-pin HD “Projector Control” port located on the rear panel of the System 8/10 PLUS.

______ Secure the screws on all D connectors.

7.Connect the BNC (RGBS) cables from the System 8/10 PLUS outputs to “INPUT A” of the projector. For S-Video or Composite Video input, use the “VIDEO IN” projector connectors and refer to the notes on the next page.

8. Apply Main Power to the System 8/10 PLUS by connecting the power cord. The Main Power LED should light. Apply power to the projector.

Extron • System 8/10 PLUS • User’s Manual • P/N 68-428-01 Rev. E

Page 4

26-483-01 specifications

The Sony 26-483-01 is a sophisticated piece of technology that showcases the brand's commitment to delivering high-performance products in the electronics landscape. This model is part of Sony’s extensive line of devices known for their innovative features and cutting-edge technologies, making it an attractive choice for consumers seeking quality and reliability.

One of the standout features of the Sony 26-483-01 is its exceptional image quality. Equipped with advanced imaging technologies, the device provides stunning clarity and vibrancy, ensuring that every detail is captured with precision. The integration of HDR (High Dynamic Range) technology allows for a broader color gamut and enhanced contrast, resulting in images that are both lifelike and immersive. Whether being used for entertainment or professional purposes, users can expect a visually stunning experience.

In terms of connectivity, the Sony 26-483-01 does not disappoint. It includes multiple input options, enabling seamless integration with various devices, such as gaming consoles, Blu-ray players, and streaming devices. Additionally, built-in Wi-Fi capabilities allow for easy access to favorite streaming services, catering to the modern user's demand for convenience and flexibility. This connectivity is further enhanced by the inclusion of Bluetooth technology, enabling users to connect wireless headphones or speakers for a more personalized audio experience.

The design of the Sony 26-483-01 reflects a modern aesthetic fused with functional usability. Its sleek and compact form factor makes it an ideal addition to any setup, whether it be in a home, office, or entertainment space. The user-friendly interface ensures that even those who are not tech-savvy can navigate through settings and features effortlessly.

Another important aspect of the Sony 26-483-01 is its energy efficiency. With an emphasis on sustainability, the device is designed to consume less power while maintaining high performance, making it an environmentally-conscious choice. Users can enjoy high-quality performance without worrying about excessive energy consumption.

Overall, the Sony 26-483-01 is a stellar option for anyone looking to invest in a versatile, high-performance device. Its combination of advanced imaging capabilities, extensive connectivity options, stylish design, and energy-efficient operation positions it as a formidable contender in today’s technology-driven market. Whether for entertainment or professional use, the Sony 26-483-01 stands out as a reliable and innovative choice.