American Standard 4205.001 Test Installed Faucet, Service, HOT Limit Safety Stop Adjustment

Page 2
TEMPERATURE SETTING NUMBERS

4 FITTING WITH SPRAY

Feed SPRAY HOSE (1) through SPRAY HOLDER (2) and attach COUPLING NUT (3) of HOSE (1) to HOSE ADAPTOR (4) on valve body. Tighten COUPLING NUT (3) firmly.

Make certain that SPACER WASHER (5) and RUBBER WASHER (6) are attached to SPRAY HOSE (1) and thread SPRAY HEAD (7) to NUT (8).

4

3

7

6

5

8

1

2

5 TEST INSTALLED FAUCET

Remove AERATOR. With handles in OFF position, turn on water supplies and check all connections for leaks. Operate HANDLE to flush water lines thoroughly. Rotate SPOUT in both directions. Replace AERATOR. Direct SPRAY HEAD into sink and activate SPRAY. Check HOSE connections for leaks.

6 SERVICE

If faucet drips proceed as follows:

1

Turn VALVE in OFF position.

2

If faucet drips, operate handle several times from "off" to "on".

Do not apply excessive force.

Clogged CARTRIDGE inlets may cause reduced flow in "full on" hot or cold.

To clean inlets, first turn off water supply, then:

Remove HANDLE (1), CAP (2), CARTRIDGE (3), and DISC & SEALS (5). Clean inlets and MANIFOLD (4). Reassemble CARTRIDGE (3), alternately tightening screws. Replace CAP and HANDLE. Check flow.

HOT LIMIT SAFETY STOP ADJUSTMENT

By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP reduces risk of accidental scalding. To set the maximum hot water temperature of your faucets, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP.

Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP (5). Follow Step "A" or "B" to adjust min./max. discharge temperature. "0" being the hottest to "7" the coldest temperature setting. Factory set at "0".

4

"A"

PRY RED RING FORWARD AND ROTATE COUNTER- CLOCKWISE ONE CLICK

"A"

3

5

"A"

"B"

PRY RED RING FORWARD

 

AND ROTATE CLOCKWISE

"B"

"B"

 

0

1

2

3

4

5 6

ADJUSTMENT WHEN WATER IS TOO HOT

6

ADJUSTMENT WHEN

5

WATER IS TOO COLD

"RED RING"- HOT LIMIT SAFETY STOP

7 CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

M968420 REV . 1 . 1

Page 1 Page 2
Image 2
Page 1 Page 2
Contents Hand Tighten Install FaucetSecure Faucet and Make Water Supply Connections Fitting with SprayHOT Limit Safety Stop Adjustment Test Installed FaucetService

4205.000, 4205.001 specifications

The American Standard 4205.001 and 4205.000 are two popular lavatory faucets known for their elegant design and reliable performance. Both models exemplify the ideal combination of style, functionality, and durability, making them excellent choices for homeowners looking to enhance their bathroom or powder room.

One of the main features of the American Standard 4205 series is its sleek, contemporary aesthetic. The faucets are available in a variety of finishes, including chrome, brushed nickel, and oil-rubbed bronze, allowing homeowners to choose a style that complements their décor. The streamlined design not only adds a touch of sophistication to any space but also ensures that the faucets are easy to clean and maintain.

In terms of technology, the 4205.001 and 4205.000 models feature a ceramic disc valve, which is a hallmark of modern faucet engineering. This valve type greatly reduces the potential for leaks and drips, providing a reliable and consistent water flow while conserving water. The ceramic disc valve also minimizes the need for frequent replacements, contributing to the longevity of the faucet.

Another noteworthy characteristic of these faucets is their water-saving features. Both models are designed to meet WaterSense certification standards, which means they use significantly less water than traditional faucets without compromising performance. This efficiency is not only environmentally friendly but also helps homeowners save on utility bills, making the faucets a smart investment in sustainability.

The installation process for the American Standard 4205.001 and 4205.000 is straightforward, thanks to the included instructions and the single-hole mount design. This makes them an excellent option for both new constructions and remodels. Furthermore, the faucets are equipped with flexible supply lines, further simplifying the installation process.

In summary, the American Standard 4205.001 and 4205.000 lavatory faucets are exceptional choices for anyone seeking a reliable, stylish, and eco-friendly option for their bathroom. With their elegant design, advanced ceramic disc technology, and water-saving capabilities, these faucets stand out as a top choice for homeowners looking to combine aesthetics with practicality. Whether you are renovating your space or building a new home, these faucets are sure to deliver both performance and beauty.
Top Page Image Contents