3461.160/3462.160/3465.160/3466.160

MADERA™ 16-1/2" HEIGHT 1.6 GPF FLUSHOMETER TOILET

FINISHED WALL

1" N.P.T. OR 1" C.W.T. SUPPLY TO FLUSH VALVE

102mm

(4)

25mm

(1)

718mm (28-1/4)

470mm (18-1/2)

C/L OF SEAT POST HOLES 140mm (5-1/2) CENTERS

121mm

(4-3/4)711mm (28)

356mm (14)

1 - 1/2

SPUD

419mm (16-1/2)

13mm

(1/2)

	338mm	FINISHED
		FLOOR
(13-5/16)

150mm (5-7/8)

238mm (9-3/8)

254mm

(10)C/L OF OUTLET

3463.160/3464.160

FINISHED WALL

718mm (28-1/4)

76mm		470mm		356mm

(3)	(18-1/2)		(14)

C/L OF SEAT POST HOLES 140mm (5-1/2) CENTERS

438mm (17-1/4)

419mm (16-1/2)

338mm

FINISHED

(13-5/16)

150mm

FLOOR

238mm

(5-7/8)

13mm

(9-3/8)

(1/2)

254mm

(10)C/L OF OUTLET

NOTES:

PRODUCT 3451.160 AND 3453.160 SHOWN, 3452.160 AND 3455.160 SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.

TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.

THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR 12" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED.

REFER TO VALVE MANUFACTURER AND LOCAL CODES.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	M58
© 2008 AS America Inc.		Revised 12/08