American Standard 2471 Install POP-UP Drain, Test Installed Fitting, Check Drain Connections

Page 2

3 INSTALL POP-UP DRAIN

Push Tail piece (11) down into Trap (C) (threaded end up).

Thread Locknut (5), Washer (4) and Gasket (3) (Bevel side up) onto Drain Body (10).

Apply a bead of Putty (D) to underside of Flange (2).

Feed Drain Body (10) up through Sink (A) and thread the Flange (2) fully onto Drain Body (10).

Tighten Locknut (5) firmly, keeping the pivot rod hole pointed towards the back of the sink.

Assemble Pivot Rod (9) as shown in Figure-4B. Notice the position of the Concave Washer (G).

Insert Pivot Rod (9) into Drain Body (10) and tighten Pivot Nut (F).

Push TAILPIECE INSERT (12) into TAILPIECE (11) and push TAILPIECE up and thread tightly into DRAIN BODY (10).

Position Extension Rod (7) onto Pop-Up Rod (E) and tighten Thumbscrew (6).

Remove one end of Clip (8) from Pivot Rod (9) by squeezing ends together while sliding.

Insert Pivot Rod (9) into second or third hole in Extension Rod (7) and reassemble Clip (8).

Drop Stopper (1) into Drain Body (10).

1

2

A

3

4

5

10

12

11

"O" RING

D

E

6

7

F

8

C

1-1/4"9

F

Adjust stopper height by repositioning Extension Rod (7) and tightening Thumbscrew (6).

GFIGURE-4B:

4 TEST INSTALLED FITTING

With HANDLES (1) in OFF position, turn on WATER SUPPLIES (2) and check all connections for leaks.

Remove AERATOR (3).

Operate both HANDLES to flush water lines thoroughly.

Replace AERATOR (3).

1

1

3

5 CHECK DRAIN CONNECTIONS

Operate Pop-Up and fill lavatory with water. Check that DRAIN STOPPER (1) makes a good seal and retains water in lavatory. Adjust stopper height by repositioning Pop-Up Rod (2) and tightening Thumbscrew (3).

Release DRAIN STOPPER (1) and check all drain connections and "P" trap for leaks. Tighten if necessary.

2

3

1

2

6 CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

M 9 6 8 2 8 6

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Supply Connections Install FaucetSecure Faucet and Make Water Check Drain Connections Install POP-UP DrainTest Installed Fitting 2471

2471 specifications

The American Standard 2471, also known as the Cadet 3, is a highly regarded toilet model known for its innovative features and reliable performance. Combining effective technology with modern design, the Cadet 3 has earned a reputation for efficiency and user comfort.

One of the standout features of the American Standard 2471 is its powerful flush system. Utilizing a unique gravity-fed flush mechanism, the Cadet 3 provides a strong flush that ensures effective waste removal while minimizing water usage. The toilet is designed with a large 3-inch flush valve that contributes to its efficient performance, helping to prevent clogs and ensuring a clean bowl with every use.

In terms of water efficiency, the American Standard 2471 meets the EPA's WaterSense criteria, using only 1.28 gallons of water per flush. This significant reduction in water consumption makes it an environmentally friendly choice, appealing to homeowners looking to save on water bills and contribute to sustainable practices. The high-efficiency flushing system does not compromise on performance, making it ideal for both residential and commercial applications.

The design of the American Standard 2471 emphasizes both comfort and style. It features a sleek, elongated bowl design that provides additional room for sitting, enhancing user comfort. Additionally, the toilet's height is designed to accommodate a wide range of users, complying with ADA standards for accessibility.

Durability is another key characteristic of the Cadet 3. Constructed from high-quality vitreous china, the toilet is resistant to chips and scratches, ensuring it remains in excellent condition with minimal maintenance over time. The smooth, easy-to-clean surface helps to maintain hygiene and reduce the effort needed for regular cleaning.

Installation of the American Standard 2471 is straightforward, with a standard 12-inch rough-in that fits most bathroom configurations. The toilet has been designed with user-friendly components, making it easy for homeowners to install or for plumbers to manage quickly.

In summary, the American Standard 2471 (Cadet 3) is an exemplary toilet model that combines efficient flushing technology, durable materials, and a user-centered design. It provides an effective solution for modern bathrooms while promoting water conservation and comfort, making it a popular choice among consumers.
Top Page Image Contents