American Standard 2373.900 Install Handles, Service, Handshower Installation for 2373.901/921

Page 3

4 INSTALL HANDLES

Push ADAPTER (1) on VALVE STEM (2), so that the hole of the

ADAPTER (1) without a spline is facing up. See figure "A". Tighten

STEM SCREW (3) to secure ADAPTER (1).

Find correct position of LEVER HANDLE ASSEMBLY (4) or CROSS

 

 

 

HANDLE ASSEMBLY (5) by adjusting male teeth on ADAPTER (1) to

4

 

5

female teeth in HANDLE (4, 5).

 

 

 

 

Thread LEVER HANDLE ASSEMBLY (4) or CROSS HANDE ASSEMBLY (5) onto DECK ADAPTER (6) until snug against mounting surface.

TOP

Figure "A"

SPLINE END DOWN

THREAD ON

TO DECK

ADAPTER

1

3

2

6

5

SERVICE

 

 

 

To change direction of handle rotation,

 

 

 

proceed as follows:

 

 

 

Turn valve to OFF position. Unthread HANDLE BASE (1) from DECK

UNTHREAD

 

 

 

 

 

ADAPTER (2).

 

 

 

Pull HANDLE ASSEMBLY off VALVE STEM (3).

1

 

 

Remove SPRING CLIP (4). Lift STOP WASHER (5), turn 90° and replace.

 

 

 

 

 

Replace SPRING CLIP (4).

 

 

 

Find correct position of HANDLE ASSEMBLY by adjusting male teeth on

90$

3

 

VALVE STEM (3) to female teeth in HANDLE.

 

Thread HANDLE ASSEMBLY onto DECK ADAPTER (2) until snug against

 

5

 

mounting surface.

4

 

 

 

 

 

 

2

 

HANDLE ASSEMBLY

6 HANDSHOWER INSTALLATION (FOR 2373.901/921)

Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge (12" max from SPOUT center) with SPRAY ESCUTCHEON (1) directed towards tub center. Be sure RUBBER RING (2) is properly seated in ESCUTCHEON (1). Install RUBBER WASHER (3) and LOCKNUT (4) from underside of ledge.

Secure SPRAY ESCUTCHEON (1) by tightening LOCKNUT.

Add SEAL WASHER (5) and connect HOSE (10) to outlet nipple at the bottom of COUPLING (7). on the SPOUT SHANK (6). Tighten firmly.

Slip SHOWER HOSE (8) with COUPLING NUT through SPRAY ESCUTCHEON (1). Install SEALS (9) and connect both HOSES (8) and (10), Connect HAND SHOWER (11) to SPRAY HOSE (8).

NOTE When not in use, HANDSHOWER should be seated in the HOLDER.

7

5

10

11

9

6

1

2

3

4

LOCKNUT

8

9

M968288 Rev. 1 . 1

Image 3
Contents ROUGHING-IN Dimensions M968288 RevRequired Tools 16 MIN Spout AssemblyPrepare Tube and TEE Assembly ADJ -1/2 toInstall Handles ServiceHandshower Installation for 2373.901/921 Test Installed Faucet Flow rate of this Tub Filler exceeds 20 gallons/minuteAt higher water pressure. Do not fill bathtub unattended

2373.900, 2373.921, 2373.901, 2373.920 specifications

The American Standard 2373.900, 2373.921, 2373.901, and 2373.920 are a series of high-quality bathroom sink faucets designed to blend style, functionality, and innovation. These models are distinguished by their modern aesthetic, making them ideal for contemporary bathrooms while maintaining American Standard's commitment to durability and ease of use.

One of the standout features of these faucet models is their EcoPulse technology, which promotes water conservation without sacrificing performance. EcoPulse reduces water flow to 1.2 gallons per minute while maintaining strong pressure, thus helping homeowners save on water bills without compromising the user experience. This feature is particularly appealing to environmentally conscious consumers looking for sustainable solutions for their homes.

In terms of design, the 2373 series boasts sleek lines and geometric shapes, available in various finishes including polished chrome and satin nickel. These finishes not only offer visual appeal but also provide a layer of protection against scratches and tarnishing, ensuring that the faucets maintain their beauty over time. The minimalist design makes it easy to integrate these faucets into any bathroom decor, from traditional to modern styles.

Installation of the American Standard 2373 faucets is user-friendly, as they come with a pre-attached mounting system that simplifies the process, allowing for a seamless setup. Additionally, the faucets feature a ceramic disc cartridge, which ensures a leak-free operation and provides long-lasting performance. This technology enhances durability and reduces the likelihood of maintenance issues, making these faucets a smart investment for any homeowner.

Another key characteristic of the 2373 series is its user-centered design. The faucets are equipped with easy-grip handles that allow for smooth operation, even when hands are wet or soapy. The ergonomic design ensures that the user experience is comfortable and convenient, particularly in busy bathroom settings.

Overall, the American Standard 2373.900, 2373.921, 2373.901, and 2373.920 faucets combine stylish design with practical features and innovative technology. Their emphasis on water conservation, ease of installation, and long-lasting performance make them an excellent choice for anyone looking to upgrade their bathroom fixtures. By choosing these faucets, homeowners not only enhance the aesthetic appeal of their bathrooms but also contribute to a more sustainable future.