Care and Cleaning, Adjustments | American Standard 2002, 2076

With correct washers in place (see Step 9a), tighten COUPLING NUT 1/4 turn

ADJUSTMENTS

TOP	ARM
TOP
	NIPPLE
	REFILL
	TUBE	TANK
		TANK
		LEVER
CRITICAL LEVEL
MARK ("C.L.")
MUST BE
1" ABOVE
OVERFLOW PIPE
FLOAT		Fig. 10A
CUP		Fig. 10A
FILL
VALVE
WATER LEVEL
ADJUSTMENT
CLIP	LINK
VALVE	ADJUSTABLE
BODY	ADJUSTABLE
BODY	HEIGHT
	HEIGHT
	SHANK
	WASHER
LOCK NUT	THREADED
	SHANK
CONE WASHER
	PARTS FOR WATER
COUPLING NUT	CONNECTION
COUPLING NUT	(SEE STEP 9)
(HAND TIGHT ONLY)	(SEE STEP 9)
(HAND TIGHT ONLY)		Diagram 1
		Diagram 1

beyond hand tight.

DO NOT OVERTIGHTEN.

a.Adjust water level. Water level should be adjusted to level indicated in tank by adjusting float cup. See Step 11 for water level adjustment method.

IMPORTANT:

b.If bowl fails to siphon, an adjustment may be required with the lift chain. Simply remove the bead chain from the retainment clip (see Fig. 10A) and take up slack on the chain, and reinsert on lift rod. Make sure the chain is not too taught.

11	Turn on water supply.	12	CARE AND CLEANING
	Turn on water supply.
	Adjust water to water
	level specified in the tank		When cleaning your toilet, wash it with mild, soapy water, rinse
	by squeezing water level
	by squeezing water level		thoroughly with clear water and dry with a soft cloth.
	adjustment clip and		thoroughly with clear water and dry with a soft cloth.
	adjustment clip and
	moving FLOAT CUP up	!	WARNING: Do not use in-tank cleaners. These products can
	or down along stainless	!	WARNING: Do not use in-tank cleaners. These products can
	or down along stainless		seriously damage fittings in the tank. This damage can cause leakage
	steel link.
	steel link.		and property damage.
			and property damage.
			American Standard shall not be responsible or liable for any
			damage caused by the use of in-tank cleaners.
13	TROUBLE SHOOTING FLUSH VALVE:	13a	REFILL TUBE REPLACEMENT:

SEAL REPLACEMENT:

1.Disconnect Chain.

2.Lift float up and remove flush valve seal by pulling seal out of groove and sliding up over float.

3. Reverse procedure to install new seal.		Locate bottom portion of
3. Reverse procedure to install new seal.		hose clip between the ribs (2)
		hose clip between the ribs (2)
		on bottom of funnel inlet.
FLOAT	FLUSH	Note: Rotate funnel to position
	FLUSH	ribs at rear of the tank.
	VALVE	ribs at rear of the tank.
	SEAL

NOTE: DO NOT ADD ANY FOREIGN MATERIALS

TO THE SEALING SURFACE.

- 4 -

730529-100 Rev. M

2076, 2002 specifications

American Standard is a renowned name in the bathroom and kitchen fixtures industry, consistently known for producing high-quality products that blend functionality, aesthetics, and durability. Among its range of offerings, models like 2733, 2627, 2792, 2367, and 2076 stand out due to their innovative features and design characteristics.

The American Standard 2733 is a soaking tub designed to provide a luxurious bath experience. With its spacious interior and sloped backrest, it allows users to fully immerse themselves in water, promoting relaxation. Made from durable acrylic, it resists scratches and stains, ensuring longevity. The tub’s sleek design can fit seamlessly into modern or traditional bathrooms alike.

Moving on to the 2627 model, this is a combination of an undermount sink and countertop, designed with functionality and elegance in mind. The smooth surface is easy to clean and comes in various finishes to suit any kitchen or bathroom decor. This model features a high backsplash to prevent water from splashing, showcasing a thoughtful design that prioritizes user convenience.

The American Standard 2792 is a two-piece toilet that marries efficiency with comfort. It features a powerful flushing system that uses less water while maximizing performance, making it environmentally friendly. The elongated bowl design provides extra comfort, and it comes with an elongated seat for added convenience. With a sleek, modern look, this toilet complements various bathroom styles while ensuring superior hygiene and functionality.

The 2367 model is one of the brand’s signature lavatory sinks, known for its versatility and craftsmanship. It comes in multiple designs, including pedestal and wall-mounted options, making it suitable for any bathroom size. The sink is made from durable vitreous china, which makes it resistant to wear and tear. Its spacious basin provides ample washing area, and the stylish design enhances the overall aesthetic of the bathroom.

Lastly, the American Standard 2076 is a corner whirlpool tub designed to optimize space while providing a spa-like experience. Its strategically placed jets offer a soothing massage effect, promoting relaxation after a long day. The compact design fits snugly into corner spaces, allowing homeowners to maximize their bathroom layout without compromising on comfort.

Together, these models represent American Standard’s commitment to quality, design, and user-friendly technology, making them a popular choice among consumers seeking reliable and stylish fixtures for their homes.

ADJUSTMENTS

DO NOT OVERTIGHTEN.