INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
COLONY 2388 / 2399 / 2359
COMPACT 2149.012
RENAISSANCE 2241
RENAISSANCE RF Total Toilet 2444
RENAISSANCE EL Total Toilet 2446
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years.
To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
!CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
RECOMMENDED TOOLS AND MATERIALS
Putty Knife | Regular Screwdriver | Adjustable Wrench | Wax Ring/Gasket (included in 2444/2446) |
Hacksaw | Flexible Supply Tube | Tape Measure | Closet Bolts (included in 2444/2446) |
Sealant | Carpenters Level |
| Seat (included in 2444/2446) |
1REMOVE OLD TOILET
a.Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b.Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!
c.Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d.Remove closet bolts from flange and clean away old wax, putty, etc. from base area. NOTE: Mounting surface must be clean and level before new toilet is installed!
O R F U T U R E U S E
2ROUGHING-IN DIMENSIONS:
NOTE: Distance from wall to closet flange centerline must be as listed below:
For 4010.010/4310.016 Tanks: A = 254mm (10")
For 4014/4314 Tanks: A = 356mm (14")
For 4010.012 and all other Tanks: A = 305mm (12")
For 4037.017 Tanks: A = 305mm (12”)
For 2444/2446 Complete Toilet: A = 305mm (12”)
FINISHED WALL |
|
| SUPPLY |
| AS |
| REQ'D. |
A | FINISHED |
| FLOOR |
3
CLOSET
FLANGE
A
CLOSET
BOLTS
INSTALL CLOSET BOLTS
Install closet bolts in flange channel, turn 90°, and slide into place 6" (152 mm) apart and parallel to wall.
S A V E F
Product names listed herein are trademarks of American Standard Inc. © American Standard Inc. 2006