Panasonic SC-HTB15 operating instructions Advanced operations

Page 25

Advanced operations

The following settings are unnecessary under general usage conditions of the system.

∫Changing the dual audio

Change the dual audio from main to secondary.

1Confirm the digital audio output setting on the

connected TV or player, etc. is set to “Bitstream”.

2Press and hold [HDMI 1/2] for more than 2 sec.

3 While the indicator of the current setting is flashing, press [HDMI 1/2] to change the setting.

A : Main

B : Secondary

A, B : Main and secondary

≥The setting works only when the dual audio is available in the audio source.

≥The setting is maintained until it is changed again.

≥The same setting is used for [TV] and [HDMI 1/2] audio sources.

∫Remote control code

When other Panasonic devices respond to this system’s remote control, change the remote control code on the active subwoofer and the remote control.

Preparation

≥Turn off all other Panasonic products.

≥Turn on this system.

Change the remote control code to code 2:

1Aim the remote control at this system’s remote control sensor.

2Press and hold [MUTE] and [HDMI 1/2] on the remote control for more than 4 sec.

≥All the indicators will blink for 10 sec when the code of this system is changed.

≥The setting is maintained until it is changed again.

≥If this system does not operate after changing the code,

repeat steps 1 and 2.

≥To change the remote control code to code 1, repeat the steps above, but replace [HDMI 1/2] with [TV].

∫To turn off the 3D surround effect and

clear-mode dialog effect

Depending on your preference, it is possible to use only the Dolby Virtual Speaker effect by turning off the 3D surround effect and the clear-mode dialog effect.

1Press and hold [TV] for more than 2 sec.

≥The indicator for the current setting blinks for 10 sec. Only Dolby Virtual Speaker is on.

3D surround effect and clear-mode dialog effect are also on.

2While the indicator is blinking press [TV] to

change the setting.

≥The setting changes each time [TV] is pressed.

≥The setting will be reset to on when this system is turned off.

∫To turn off VIERA Link “HDAVI Control”

When “HDAVI Control” compatible equipment does not work well with this system, for example, it is possible to turn off this function as follows:

≥When VIERA Link is turned off the ARC function is not available. Be sure to connect the optical digital audio cable. (> 19)

1Press and hold [MUTE] on the remote control and [s VOL] on the active subwoofer for more

than 2 sec.

2After the setting has changed, turn off all the connected devices and then turn them on again.

∫To reduce the clear-mode dialog effect

When the dialog does not sound natural while the

 

 

volume is set low, for example, it is possible to

 

reduce the dialog enhancing effect as follows:

Operations

∫ To turn off the volume limitation

Press and hold [TV] on the remote control and

 

[s VOL] on the active subwoofer for more than

 

2 sec.

 

If a state of the lowered volume disturbs you every

 

time this system turns on, for example, it is possible

 

to turn off this function as follows:

 

Press and hold [MUTE] on the remote control and

 

[VOL r] on the active subwoofer for more than

 

2 sec.

 

 

 

 

The settings of VIERA Link “HDAVI Control”, the clear-mode dialog effect and the volume limitation remain intact even if you switch this system to standby mode. To turn these 3 functions back on, this system must be set back to the factory preset. (> 26)

≥All the indicators will blink once when the setting is changed.

25

VQT3R83

Page 24 Page 26
Image 25
Page 24 Page 26
Contents EB EG GN GS Model No. SC-HTB15Button-type battery Lithium battery Safety precautionsPlacement UnitFor the United Kingdom and Ireland How to replace the fuseBefore use Table of Contents Clean the system with a soft, dry cloth AccessoriesUnit care Control reference guide Active subwoofer Front Rear Standby/on switch Í/IActive subwoofer To replace a button-type battery Remote controlPlace the speakers using Stands Speaker feet Base stands Selecting the placement method≥ These are examples of placement methods When placing the speakers in front of the TV When placing the speakers on a wallWhen carrying the active subwoofer Speaker systemAssembling the speakers When placing the speakers on a wallPlace the speakers horizontally Use screws a to secure the speakers to the speaker jointDrive a screw not supplied into the wall Connect the speaker cablesFit the speaker securely onto the screws with the holes 211 mm 388 mm 201 mm 14.3 mmFit the speakers securely onto the screws with the holes Place the speakers vertically∏ 1 Speaker L ∏ 1 Speaker R Place the speakers using the stands When placing the speakers on a tableSpeaker joint Stands Screws a Large Align the holes with the projecting parts on the speakerSpeaker L Speaker R Speaker cables Place the speakers using the speaker feetRED Speaker joint Screws a Speaker feet Large Speaker foot a supplied Speaker foot B suppliedInsert the speaker cable through the base Place the speakers using the base standsAttach the speaker to the base Bases Screws B SmallHorizontal placement When placing the speakers on a wallVertical placement Speaker fall prevention measuresHorizontal placement Vertical placement   When placing the speakers on a tableBasic connection ConnectionsLabelled Hdmi ARC Verify if the TV’s Hdmi terminal is labelled Hdmi ARCOptical digital audio cable not supplied Not labelled Hdmi ARCPreparation Connection with Hdmi compatible devicesHdmi standby pass-through ≥ Connect this system to the TVAC mains lead connection Speaker cable connectionSet the voltage Press i VOL j to adjust the volume of the speakers Using this unitAudio format indicator Press Mute3D sound To change the audio output modeAudio output modes Press and hold Mute for more than 2 secLinked operations with the TV What is Viera Link Hdavi Control?Viera Link Hdavi ControlTM Advanced operations General operation TroubleshootingSound Volume is lowered when this system is turned onNo sound or image Dual audio cannot be changed from main to secondaryIndicators blink simultaneously Indicator illuminationIndicator blinks for 10 sec Indicators blink for 10 secSpecifications For business users in the European Union LicensesLaite ProduktVekselstrømnett Plassering\For\the\United\Kingdom\and\Ireland\customers\ Sales and Support Information
Related manuals
Manual 32 pages 17.1 Kb

SC-HTB15 specifications

The Panasonic SC-HTB15 is an impressive soundbar system that enhances your home entertainment experience by delivering high-quality audio performance without taking up too much space. Designed to seamlessly complement the aesthetics of modern televisions, this compact soundbar is packed with essential features and technologies that elevate both music listening and movie watching.

One of the standout features of the SC-HTB15 is its power output. With a total power output of 120 watts, it provides a substantial audio experience that fills the room with rich, clear sound. The soundbar is equipped with a built-in subwoofer that contributes to deep, resonant bass, allowing you to feel the energy of your favorite movies, shows, and music tracks.

The SC-HTB15 utilizes Bluetooth connectivity, making it incredibly easy to stream music from your smartphone, tablet, or other compatible devices. This wireless feature adds convenience, allowing you to enjoy your favorite playlists or podcasts without the hassle of wires. The soundbar also supports a wide range of audio formats, ensuring versatility in playback options.

In terms of design, the Panasonic SC-HTB15 is sleek and compact, enabling it to fit perfectly under your TV or on a shelf without occupying much space. Its minimalist style blends effortlessly with various home decor choices while providing a modern touch.

The soundbar’s enhanced audio technologies include Dolby Digital processing, which creates a more immersive sound experience. This feature is particularly advantageous when watching films with dynamic soundscapes or listening to music with complex arrangements. The sound quality is refined, making dialogues clear and music rich, allowing for a captivating audio experience.

Setup is straightforward as well, with a simple connection process that includes both optical and HDMI ARC inputs, ensuring compatibility with a range of televisions and audio sources. Additionally, the soundbar features a remote control that provides convenience, allowing you to adjust volume levels, switch inputs, and more from the comfort of your couch.

In summary, the Panasonic SC-HTB15 is an exceptional soundbar that offers high-quality audio performance, Bluetooth streaming, and an elegant design. Its combination of a powerful built-in subwoofer, Dolby Digital technology, and user-friendly features makes it an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents