Panasonic RP-BTD10 owner manual Charging, Connecting a Bluetooth device, Turning the power on/off

Page 3

Charging

The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit.

Connect this unit to a computer

Left

1 using the USB charging cord

Computer

• During charging, the LED on the left

LED

speaker will light in red. When charging

 

is completed, the LED will go out.

 

Connecting a Bluetooth® device

To establish a wireless connection, register the unit with Bluetooth® compatible

 

devices.

ENGLISH

 

Preparation on the Bluetooth® device

• Turn on the power, and enable the Bluetooth® feature.

 

• Place the device within 1 m (3.3 feet) from the unit.

 

• Check the device operation in its operation instructions, as required.

 

• Charging will take approximately

4.5 hours from empty state to fully

charged.

USB charging cord (supplied)

■Note

•The Bluetooth® feature cannot be used when this unit is connected to a computer using the USB charging cord.

•Recharge in a room temperature between 10 °C and 35 °C (50 ºF and 95 ºF).

•The power cannot be turned on while charging.

•Do not use any other USB charging cords except the supplied one.

Caution: Use only the supplied USB charging cord when connecting to a computer.

Turning the power on/off

1 Press and hold the power button for approximately 2 seconds

• A beep will sound and the LED on the left speaker will blink.

Power on for the first time

1 Turn on the unit

• The unit will start searching for the Bluetooth® device to connect to, and the LED on the left speaker will blink in blue and red alternately. (Only one operation after purchase)

2 When the unit (“RP-BTD10”) is detected by the Bluetooth® device, select it

•If prompted for a passkey, input “0000 (four zeros)”.

•If the Bluetooth® profile selection screen appears, select the “A2DP” profile. If “A2DP” is not supported or if you want to just use phone calls, select the “HSP” or “HFP” profile. (For details on profiles, see “Listening to music” (→ P. 4) and “Making a phone call” (→ P. 5))

3 Check the connection with the Bluetooth® device on the unit

Connection after the second time

<Connect the same Bluetooth® device> When the unit is turned on, it will search for the previously setup Bluetooth® device and automatically start connecting to it. First the LED on the left speaker lights in blue

and repeats on and off. When the connection is established, blinking pattern will change.

<Connect a different Bluetooth® device>

Disable the Bluetooth® feature on the previously connected device. Check that the unit is turned off. Press and hold the pairing button for approximately 5 seconds. The unit will start searching for other Bluetooth® device. The LED on the left speaker will blink in blue and red alternately. A beep will sound.

Continue steps 2 and 3.

■Note

• If connection to a device is not

To turn the power off

Power button

• First the LED on the left speaker

lights in blue and repeats on

and off. When the connection is

established, blinking pattern will

established within approximately

5 minutes, the unit will be turned off. Start from step 1 again.

• 2 or more Bluetooth® devices cannot

•Press and hold the power button for 2 seconds or more. A beep will sound and the power will be turned off.

■Note

•When the unit is not operated for approximately 5 minutes, the power will automatically turn off. (See “Auto power off” (→ P. 5))

change.

be connected to the unit at the same

VQT5J78

time.

• You can pair up to 8 devices with

 

 

this unit. If a 9th device is paired, the

 

3

device with the oldest connection will

 

be replaced. To use it, pair it again.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Português Español Français English Table of contents AccessoriesPart names Charging Connecting a Bluetooth deviceTurning the power on/off Power on for the first timeFor NFC-compatible Android devices only Operating time of batteryRemote controlling Listening to musicUseful functions Resetting the unitAuto power off LED indicator lightRestoring to the factory settings MaintenanceAbout Bluetooth FCC Note Safety precautionsUnit AllergiesTroubleshooting guide Copyright, etc SpecificationsLimited Warranty Limits And Exclusions Limited Warranty only for U.S.A. and Puerto RicoPanasonic Products Limited Warranty Limited Warranty Coverage For USA and Puerto Rico OnlyExchange Program Limited Warranty only for CanadaEn Cf Sp Pr

RP-BTD10 specifications

The Panasonic RP-BTD10 is a remarkable addition to the audio accessory market, showcasing the brand’s commitment to high-quality sound and user-friendly design. This wireless headphone model combines modern aesthetics with cutting-edge technology, making it a preferred choice for music enthusiasts and casual listeners alike.

One of the standout features of the RP-BTD10 is its Bluetooth connectivity, which allows users to effortlessly connect to a wide range of devices, including smartphones, tablets, and laptops. This wireless capability not only enhances convenience but also provides users with the freedom to move without the hassle of tangled wires. The headphones support advanced Bluetooth profiles, ensuring seamless pairing and stable connections, which is essential for uninterrupted audio streaming.

The design of the RP-BTD10 is both stylish and ergonomic, featuring plush ear cushions that provide comfort for extended listening sessions. The adjustable headband ensures a secure fit, accommodating various head sizes. Moreover, the headphones are lightweight, reducing fatigue during long periods of use.

Sound quality is paramount in any audio device, and the RP-BTD10 does not disappoint. It is equipped with high-performance drivers that deliver rich bass and clear treble, ensuring a well-rounded audio experience. Whether users are listening to their favorite music genres or delving into podcasts, the headphones offer exceptional sound clarity and fidelity.

Another key characteristic of the RP-BTD10 is its battery life. With an impressive playback time, users can enjoy extended listening sessions without needing frequent recharges. The headphones also feature a quick charge option, allowing for several hours of use with just a short charging time, which is perfect for those on the go.

In addition to these features, the RP-BTD10 is designed with practicality in mind. It includes integrated controls on the ear cups, enabling users to easily adjust volume, skip tracks, and answer calls without needing to reach for their devices. This hands-free functionality enhances the user experience, particularly for those who lead active lifestyles.

Overall, the Panasonic RP-BTD10 stands out as a reliable and stylish wireless headphone option, combining superior sound quality, comfort, and convenience in a sleek package. It caters to diverse audio needs while showcasing Panasonic's dedication to innovation and excellence in consumer electronics. With its blend of technology and design, the RP-BTD10 is a worthy investment for anyone seeking to elevate their audio experience.
Top Page Image Contents