American Standard dimensions 3355.160/3356.160, 3357.160/3358.160

AFWALL™ ADA RETROFIT 1.6 GPF FLUSHOMETER TOILET

BARRIER FREE

3355.160/3356.160

19mm

(3/4)

FINISHED WALL

660mm

(26)

73mm (2-7/8)

470mm

(18-1/2)

C/L OF SEAT POST HOLES 140 mm (5-1/2) CENTER

1" N.P.T. OR C.W.T. SUPPLY AS REQUIRED TO FLUSH VALVE

C/L

121mm (4-3/4)

	356mm
	(14)
		292mm
1-1/2 SPUD	(4) 22mm
		(11-1/2)
	(7/8)
	HOLES

83mm (3-1/4)

62mm (2-3/8)

133mm (5-1/4)

368mm			229mm
(14-1/2)	419mm		(9)	191mm
	(16-1/2)			(7-1/2)
FINISHED				133mm
FLOOR		C/L OF
				(5-1/4)
		OUTLET

32mm (1-1/4)

3357.160/3358.160

(3/4)

19mm

83mm (3-1/4)

62mm (2-3/8) 133mm (5-1/4)

FINISHED WALL
660mm
(26)
76mm(3) DIA. HOLE IN WALL
FOR 1-1/2 SPUD			C/L
470mm
(18-1/2)			356mm
			(14)
C/L OF SEAT POST HOLES
140mm(5-1/2) CENTERS		127mm
				367mm
		(5)
				320mm(14-7/16)
368mm			229mm
(14-1/2)				191mm (12-9/16)
	(4)	22mm (7/8)	(9)
				(7-1/2)
	DIA. HOLES
	419mm
FINISHED	(16-1/2)
				133mm
FLOOR		C/L OF
				(5-1/4)
		OUTLET
32mm
(1-1/4)

NOTES:

●Toilet designed to meet ADA accessibility standards when top of seat height set at 432 to 483mm (17" to 19") from finished floor.

PRODUCT 3355.160 AND 3357.160 SHOWN, 3356.160 AND 3358.160 SAME AS EXCEPT

WITH SLOTTED RIM FOR BED PAN HOLDING.

*REQUIRES AMERICAN STANDARD KIT 736046-100 TO UPGRADE EXISTING INSTALLATION OF FLUSHOMETER VALVE AND COMPONENTS.

WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED).

SUGGESTED 1/16 CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.

TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.

FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	M76
© 2008 AS America Inc.		Revised 11/08