American Standard 3305 Cone Washer with, Plastic Supply Line, Install Toilet, Install Tank

Page 2

6

BOLT CAP

CLOSET FLANGE

CLOSET BOLT

WASHER NUT

INSTALL TOILET

a.Position toilet squarely to wall and, with a rocking motion, press bowl down fully on wax ring and flange. Alternately tighten nuts until toilet is firmly seated on floor.

!CAUTION:

DO NOT OVERTIGHTEN NUTS

OR BASE MAY BE DAMAGED!

b.Install caps on washers. (If necessary, cut bolt height to size before installing caps.)

c.Smooth off the bead of sealant around base. Remove excess sealant.

7

For Tanks/Bowls using Speed Connect System (Tank mounting bolts pre-installed).

RUBBER

TANK MTG. GASKET

BOLTS PRE-

INSTALLED

WASHER/

NUT

COMBO

INSTALL TANK

a.Install large rubber gasket over threaded outlet on bottom of tank and lower tank onto bowl so that tapered end of gasket fits evenly into bowl water inlet opening, and tank mounting bolts go through mounting holes. Secure with metal washer/nut combo.

b.With tank parallel to wall, alternately tighten nuts until tank is snugged down evenly against bowl surface.

*USE INCLUDED TOOL, NUT DRIVER, OR DEEP SOCKET RACHET.

!CAUTION:

DO NOT OVERTIGHTEN NUTS MORE

THAN REQUIRED FOR A SNUG FIT!

8 INSTALL TOILET SEAT Install toilet seat in accordance with manufacturer's directions.

9a

Before continuing, determine the type of water supply connecation you have from

 

the chart below and use the appropriate assembly parts required to properly

 

reconnect the water supply. DO NOT use plumber's putty to seal these fittings.

METAL / COPPER

METAL FLANGED

METAL SPIRAL

VINYL / BRAIDED

FLARED TUBING

TUBING

TUBING

CONNECTOR

LOCK NUT

LOCK NUT

LOCK NUT

LOCK NUT

CONE

EXISTING

EXISTING

COUPLING

WASHER

WASHER

CONE

NUT

COUPLING

EXISTING

WASHER

 

 

 

NUT

COUPLING

COUPLING

 

 

NUT

NUT

 

WATER

WATER

WATER

WATER

SHUT-OFF

SHUT-OFF

SHUT-OFF

SHUT-OFF

These parts must be used as

Use existing

Use existing spiral

Captive cone

illustrated to insure water-tight

coupling nut

cone washer.

washers already

connection. Use of existing

and washer.

Fluidmaster cone

included. No

coupling nut may result in

 

 

washer may not

additional washers

water leakage. Water supply

 

 

seal completely on

needed.

tube or pipe must extend at

 

 

spiral type supply

 

least 1/2" inside threaded

 

 

line.

 

shank of valve (does not

 

 

 

 

apply to flanged tubing).

 

 

 

 

 

 

 

CAUTION: DO NOT USE

 

CAUTION: Overtightening of

CONE WASHER WITH

 

LOCK NUT or COUPLING NUT

 

could result in breakage and

PLASTIC SUPPLY LINE.

 

potential flooding.

9b

With correct washers in place (see Step 9a), tighten COUPLING NUT 1/4 turn beyond hand tight.

DO NOT OVERTIGHTEN.

- 2 -

7301079-100 Rev. B

Image 2
Contents F U T U R E U S Recommended Tools and MaterialsRemove OLD Toilet V E FCone Washer with Install ToiletInstall Tank Plastic Supply LineAdjustments Repair Parts ListCare and Cleaning Troubleshooting

3305 specifications

The American Standard 3305 is a prominent toilet model renowned for its exceptional design, performance, and innovative features. Crafted with the consumer's comfort in mind, this toilet combines modern aesthetics with highly efficient technology, making it a top choice for residential and commercial spaces alike.

One of the standout features of the American Standard 3305 is its WaterSense certification, which denotes significant water efficiency. The toilet uses only 1.28 gallons per flush (GPF), contributing to substantial water savings without sacrificing flushing power. This feature not only promotes environmental stewardship but also helps reduce water bills, making it a practical choice for eco-conscious consumers.

The toilet is equipped with the EverClean surface, a unique coating that inhibits the growth of stain and odor-causing bacteria, mold, and mildew. This innovative technology ensures that the toilet remains cleaner for longer periods, reducing the frequency of deep cleaning required. As a result, users can enjoy a fresher, more hygienic bathroom experience.

The American Standard 3305 is designed with comfort in mind. It features a comfortable height that makes it accessible for a wider range of users, including individuals with mobility challenges. The elongated bowl design enhances user comfort, providing ample space and support.

Installation is made easy with the toilet’s straightforward design and compatible rough-in measurements. The American Standard 3305 can be easily installed in most standard bathrooms, making it a convenient option for both DIY homeowners and professional plumbers.

Another key characteristic of this model is its powerful flush technology. The toilet utilizes a siphonic action that ensures a strong and efficient flush, effectively clearing waste with minimal water usage. This reliability alleviates concerns over clogs and ensures consistent performance over time.

In terms of design, the American Standard 3305 exhibits a sleek, modern profile that can complement various bathroom decors. Available in multiple colors, it provides versatility for homeowners wishing to match their toilets with existing fixtures.

Overall, the American Standard 3305 boasts an impressive blend of efficiency, comfort, and advanced technology. Its combination of eco-friendliness, hygienic features, and stylish design has solidified its reputation as a leading choice in the competitive toilet market. Whether for personal use at home or for a bustling public restroom, the American Standard 3305 stands out as a premier option that meets the demands of modern sanitation needs.