American Standard 4101.350 Install Faucet Without Escutcheon Plate, Make Water Supply Connections

Page 2

1a

INSTALL FAUCET WITHOUT ESCUTCHEON PLATE

(4101.115 with soap dish) (4101.350 less soap dish)

Insert SEAL WASHER (1) into ESCUTCHEON (2). Place ESCUTCHEON (2) onto sink or mounting surface. Insert supply HOSES (3) and SHANK (4) through ESCUTCHEON (2) and mounting surface.Make sure slot in fitting base aligns with tab on ESCUTCHEON (2). Figure 1.

Assemble RUBBER WASHER (5), BRASS WASHER (6) and threaded LOCKNUT (7) onto SHANK (4) from underside of sink or mounting surface. Hand tighten LOCKNUT (7) and check that rotation of HANDLE (8) from HOT to COLD is centered.

Use a screwdriver to tighten SCREWS (9) on LOCKNUT (7). Work your way around LOCKNUT (7), tightening the SCREWS (9) slightly each time until all are snug to ensure even pressure.

Install SPOUT ASSEMBLY: Insert SEAL WASHER (1a) into ESCUTCHEON (2a). Insert HOSE (10) and SHANK (11) through ESCUTCHEON (2a) and mounting surface. Make sure slot in spout base aligns with tab on ESCUTCHEON (2a).

Figure 2.

Assemble RUBBER WASHER (5a), BRASS WASHER (6a), and threaded LOCKNUT (7a) onto SHANK (11) from underside of sink or mounting surface. Hand tighten LOCKNUT (7a). Use a screwdriver to tighten SCREWS (9a) on LOCKNUT (7a) the same as fitting installation above.

(4101.115 with soap dish) Push SOAP DISH (11) into SOAP DISH SHANK (12). Insert SOAP DISH ASSEMBLY into mount hole. From underside of counter assembly LOCKNUT (13) onto SOAP DISH SHANK (12).

Align SOAP DISH (11) and tighten LOCKNUT (13).

8

Figure 1

Figure 2

SLOT

4

 

ALIGN SLOT

 

3

AND TAB

 

ALIGN SLOT

 

TAB

SLOT

2

AND TAB

 

 

 

1

11

 

 

 

 

 

TAB

11

2a

5

12

1a

 

6

 

 

 

 

 

 

7

 

 

 

9

5a

6a

 

13

 

 

 

7a

 

 

9a

10

 

 

 

2 MAKE WATER SUPPLY CONNECTIONS

 

 

Turn off hot and cold water supplies before beginning.

 

 

Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection on fitting

 

supplies are 3/8" compression. Connect left supply (Marked with a Red Stripe)

2

to Hot and right supply (Marked with Blue Stripe) to Cold wall supply. Use adjustable

wrench to tighten connections. Do not over tighten.

 

1

 

 

 

Faucet supplies are 21" long from faucet base.

 

 

Note: If additional supply length is required, installer must purchase

 

HOT

those parts separately.

 

 

COLD

Important: If SUPPLY HOSES (1, 2) are too long, loop as illustrated to avoid kinking.

M968584

Image 2
Contents Install Faucet with Deck Escutcheon 4101.351Make Water Supply Connections Install Faucet Without Escutcheon PlateWith soap dish 4101.350 less soap dish HOTConnect Spray Hose and Install Weights Check Connections for LeaksClogged Cartridge outlets or inlets may cause reduced flow Test Installed FaucetService HI-FLOW PULL-OUT

4101.351, 4101.350 specifications

The American Standard 4101.351 and 4101.350 are innovative, high-efficiency toilet models designed to combine performance with advanced flushing technologies and sleek aesthetics. These models exemplify modern engineering and focus on water conservation, making them an excellent choice for eco-conscious homeowners.

One of the standout features of the 4101 series is its powerful flushing system, known as the Cadet 3. This unique system utilizes a larger trapway and a wider flush valve, allowing for an impressive and effective flush that clears the bowl with minimal water usage. The 4101.351 and 4101.350 are designed with a 1.28 gallons per flush (GPF) rating, which is well below the standard 1.6 GPF while still ensuring optimal performance. This efficiency makes these toilets not only environmentally friendly but also cost-effective, reducing water bills without sacrificing performance.

Another notable technology integrated into these models is the EverClean surface, a silver-ion coating that inhibits the growth of stain and odor-causing bacteria, mold, and mildew. This innovative feature helps maintain cleanliness and hygiene, ensuring that the toilet remains fresh and easy to clean over time. Additionally, the smooth surface minimizes the need for harsh chemicals, contributing to a healthier home environment.

The American Standard 4101.351 and 4101.350 also incorporate a comfortable height design, which is particularly beneficial for individuals with mobility challenges or those who prefer an elevated seat. The elongated bowl design offers added comfort, making these toilets suitable for all users.

Aesthetically, the 4101 series boasts a sleek, modern design that complements a variety of bathroom styles. Available in an array of colors, these toilets can seamlessly integrate into any decor while enhancing the overall look of the space.

In summary, the American Standard 4101.351 and 4101.350 are excellent toilet options that excel in performance, efficiency, and design. Their advanced flushing technology, water-saving capabilities, and ease of maintenance make them ideal for homeowners looking to upgrade their bathrooms while being mindful of environmental impact. With these features combined, it's clear that the 4101 series is a smart investment for any modern home.