PYLE Audio PLCD14MRKT owner manual Take OUT Screw Before Installation, Din Front/Rear-Mount

Page 3

INSTALLATION

Notes:

•Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

•Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

•Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

•Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

•Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

•If installation angle exceeds 30˚ from horizontal, the unit might not give its optimum performance.

30˚

•Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from “Front” (conventional DIN Front- mount) or “Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis).

For details, refer to the following illustrated installation methods.

TAKE OUT SCREW BEFORE INSTALLATION

Before install the unit, please remove the two screws.

Take out screw before installation

DIN FRONT-MOUNT (Method A)

Installation Opening

This unit can be installed in any dashboard having an opening as show below:

53 mm

182 mm

Installing the unit

Be sure you test all connections first, and then follow these steps to install the unit.

1.Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal.

2.Disconnect the wire harness and the antenna.

3.Press the release button on the front panel and remove the control panel (see the steps of “removing the front panel”).

4.Lift the top of the outer trim ring then pull it out to remove it.

5.The two supplied keys release tabs inside the unit's sleeve so you can remove it. Insert the keys as far as they will go (with the notches facing up) into the appropriate slots at the middle left and right sides of the unit. Then slide the sleeve off the back of the unit.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PLCD14MRKT Contents Installing the unit InstallationTake OUT Screw Before Installation Installation OpeningRemoving the unit Grounding of the unitDIN REAR-MOUNT Method B Removing the Front Panel Using the Detachable Front PanelInstalling the Front Panel Precautions when handingMain Unit Wiring ConnectionLocation of Keys OperationLoudness Sound AdjustmentReset Function Faceplate ReleaseRadio Operation Selecting Tracks by AMS/D- AUD Button Ejecting a DiscMP3 Operation for with MP3 Operation Version only Selecting Tracks in Single StepSearching From Root Directory WMA OperationFunction Keys & Control Remote Control HandsetDisc Note Radio SpecificationGeneral CD PlayerNot on Trouble ShootingSymptom Cause No power Solution

PLCD14MRKT specifications

The PYLE Audio PLCD14MRKT is a versatile and robust marine stereo system designed specifically for maritime environments. Its rugged design ensures resilience against water, dust, and UV exposure, making it an ideal choice for boat enthusiasts and outdoor adventurers. This unit not only delivers powerful audio performance but also integrates modern technology to enhance your listening experience on the open water.

One of the standout features of the PLCD14MRKT is its AM/FM radio, which allows users to stay connected to their favorite stations while out at sea. The built-in CD player is compatible with standard audio CDs, providing a traditional listening option that many users still appreciate. Additionally, the unit is equipped with a USB port and an SD card slot, enabling direct playback of MP3 and WMA files. This flexibility makes it easy to listen to personalized playlists while cruising along.

The PLCD14MRKT also boasts Bluetooth connectivity, allowing for seamless pairing with smartphones and other Bluetooth-enabled devices. Users can stream music wirelessly, making it simple to enjoy their favorite songs or podcasts without the hassle of physical connections. This feature is perfect for those who want to access their music libraries or streaming services like Spotify while out on the water.

Another notable characteristic of this marine stereo is its multi-zone control capability. The stereo includes four-channel outputs, allowing for the connection of multiple speakers to create an immersive sound environment. The 240-watt peak power output ensures that all audio can be heard clearly, even amidst the sounds of the ocean.

The user-friendly interface of the PLCD14MRKT features an LCD display that provides essential information at a glance. The buttons and controls are designed for ease of use, even when wearing gloves, which is a critical aspect for a marine environment. This attention to usability enhances the overall experience, especially during rough weather or when navigating tricky waters.

In conclusion, the PYLE Audio PLCD14MRKT is a well-rounded marine stereo that combines dependability, quality sound, and modern features, making it an excellent choice for anyone looking to enhance their aquatic audio experience. Its waterproof design, multiple playback options, Bluetooth capabilities, and powerful performance make it a smart investment for boating and outdoor entertainment. Whether you're hosting a party on deck or simply relaxing on a calm day, the PLCD14MRKT ensures you have the best soundtrack for your adventures on the water.
Top Page Image Contents