Using the Mixer Controls, Using the Microphone

Using the Mixer Controls

Turning on the Mixer

1.Turn on the output amplifier and temporarily set its volume to the minimum setting.

2.On the mixer, turn ON the power switch. The adjacent power LED will illuminate.

3.Turn on the audio input sources you wish to mix, and set them to play (or talk continuously into the microphone).

4.To monitor the audio input sources so that you can decide when to mix in each input, see “Monitoring ‘Cueing’ the Inputs.”

5.To mix the audio input sources so that you can play them through your amplifier system or record them on your tape deck, see “Mixing the Inputs.”

Monitoring (”Cueing”) the Inputs

1.Set the CUE ASSIGN switch of the input source (MIC , CH1, CH2, CH3 or CH 4) you wish to monitor.

2.Adjust the Headphone Level control to a comfortable listening level.

3.The Headphone CUE/PGM control permits you to switch easily from listening to CUE material to

the playing PROGRAM sound. You can also listen to both simultaneously by moving the Headphone CUE/PGM control to a point midway between the two ends.

PM 3008: This model has an additional CUE on the sampler module for you monitor the sampled signal being applied. To monitor a sampled signal, press the SAMPLE ASSIGN button for the channel to which the sample has been saved, and then press the SAMPLE CUE button to audition this sound.

Mixing the Inputs

There are a maximum of ten input sources available at one time, including two microphone inputs. Both microphone input sources are always available as part of the mix, if desired. Each of the four audio channels can be linked to two different input sources, and one of these sources for each channel is available for mixing.Turn on all the available audio sources and be sure they are providing sound before continuing.

1.Select the Channel Input Selectors for each channel, choose the audio sources you want to mix for each channel (i.e., choose PHONO1/LINE1 or LINE2).

2.Set the Mic and Channel Level controls all to within the 8 - 10 range.

3.Slide the MASTER volume control toward 10 until you get an average reading of 0 on both Output Level LED Meters. The output level displayed in the meters represents the TOTAL output from all the channels supplying audio to the mix. NOTE: Once you set this level, we suggest you do not change it!

4.If you add or change input sources, adjust the corresponding MIC1, 2 or CH1, CH2, CH3 or CH4 level control(s) to maintain the average reading of 0 on the LED meters.

5.To change the overall sound level, adjust the RECEIVER/AMPLIFIER (NOT THE MIXER) volume control to the desired volume.

Adding Equalization to the Mix

You can further tailor the sound processed through the mixer to match your acoustic surroundings or suit your personal preferences by using the ten frequency sliders for each channel. To engage the equalization module, press the Equalization On/Off Switch.

Each one of the sliding controls boosts or cuts the selected frequency by up to 12 dB. If you leave a slider at the center (”0”) position, the corresponding frequency range for that stereo channel will be left unaffected (”flat”). Please note that in order to provide a smooth range of control, the frequency ranges overlap slightly. Therefore, for example, if you raise the level in the 1K range, the 400 and 2.4K ranges are also slightly affected.

Using the Microphone

Incorporating Voice into the Mix

To blend voice from the microphones with the audio program material, first be sure the MIC/TALKOVER switch is set to the ON position. (In this position, the MIC channel is mixed into the program like any other audio input source.)

Then adjust the corresponding MIC level controls to increase or decrease the microphone level (this will not affect the main volume inputs). When a microphone is not in use, set the MIC/TALKOVER switch to OFF.

Talkover Mode

Talkover mode allows a voice to be heard clearly through the microphone by attenuating all the other audio input sources. This mode is engaged by setting the Talkover Switch to the TALKOVER position.

Microphone Tone Controls

These BASS and TREBLE controls, permit you to tailor the tone frequencies of the MIC inputs processed through the mix. Left in their center positions, the sound is unaffected (”flat”).

Microphone Level Controls

The independent MIC1 and MIC2 controls permit you to increase or decrease the levels of these microphones within the mix.

8 – PYRAMID Mixer Owner’s Manual

PYRAMID Mixer Owner’s Manual – 9

PM 1008 specifications

The PYLE Audio PM1008 is a powerful and versatile PA (Public Address) system designed to deliver high-quality audio for various applications, including outdoor events, parties, and corporate gatherings. With its robust design and advanced features, the PM1008 aims to provide users with optimal sound performance and a user-friendly experience.

One of the standout features of the PM1008 is its remarkable power output. With an impressive 1000 watts peak power, this PA system ensures that audio can be projected clearly and loudly across large venues and outdoor spaces. The system is equipped with an 8-inch subwoofer that enhances bass response, making music and speech sound fuller and more engaging. The combination of the subwoofer and high-frequency driver ensures a balanced audio output across the frequency spectrum.

The PYLE PM1008 is built with user convenience in mind. It includes multiple connectivity options, such as Bluetooth, which allows for wireless streaming from smartphones, tablets, laptops, and other devices. Users can easily connect to the system without the hassle of tangled wires. Additionally, it features USB and SD card slots, enabling users to play music files directly from USB drives or SD cards, offering versatility in playback options.

The built-in mixer is another notable characteristic of the PM1008, allowing users to connect multiple microphones and instruments. This makes it ideal for live performances, karaoke, and other interactive events. The mixer features independent volume controls for each input, ensuring that sound levels can be adjusted to suit the environment and preferences.

Portability is a key advantage of the PYLE PM1008. Its lightweight design makes it easy to transport, while the integrated handle and wheels facilitate effortless movement from one location to another. The speaker cabinet is constructed for durability, ensuring that it can withstand the rigors of travel and outdoor use.

Moreover, the PM1008 includes additional features such as LED lighting, adding an immersive visual element that enhances the atmosphere during performances and gatherings. The user-friendly interface allows for quick adjustments, making it accessible for both beginners and experienced users alike.

In summary, the PYLE Audio PM1008 PA system is an excellent choice for anyone looking for a reliable, high-performance audio solution. With its powerful output, multiple connectivity options, built-in mixer, and portability, it is well-suited for a wide range of applications, ensuring that every event is memorable and enjoyable.