3.The SAMPLER LEVEL control
To adjust the level of the sample playback as it enters the mix, rotate the SAMPLER LEVEL to increase or decrease the level.
4.The SAMPLER PAN control
To adjust the balance of the sample playback as it enters the mix, set the control in the center position to playback the sample evenly through the left and right channel. Turning the SAMPLER PAN control to left or right will move the playback sample similar to a balance control.
5.The PITCH control
To adjust the speed of the playback signal.
Set the control to the center position and record the sample, to get a perfect sample. During the playback, rotate the PITCH control to reduce or increase the pitch of the sample, set to the center for a normal pitch.
PDSP850 Specifications
Input Sensitivity/Impedance |
|
| |
Mic | 1.5mV/600 Ohms | ||
Line | 150mV/27k Ohms | ||
Phono | 3.0mV/47k Ohms | ||
|
|
|
|
Output Level |
|
|
|
Mic | 1.5mV/600 Ohms | ||
Line | 1.0V/1k Ohms | ||
Rec | 100mV/1k Ohms | ||
|
|
| |
Frequency Response | 20Hz to 20k Hz | ||
|
|
|
|
S/N Ratio |
|
|
|
Mic |
| >60dB | |
Line |
| >80dB | |
Phono |
| >70dB | |
|
|
|
|
Distortion |
|
|
|
Mic |
| <0.2% | |
Line |
| <0.02% | |
Phono |
| <0.08% | |
|
|
|
|
Sampling Length(ADPCM) | 4sec X 1 | 16sec X 1 | |
| 8sec X 2 | 24sec X 1 | |
| 12sec X 1 |
|
|
|
|
| |
Pitch Changer | +/- 1/2 Octave | ||
|
|
| |
Power Source | 115VAc, 60Hz/230VAc, 50 Hz | ||
|
|
| |
Dimensions(HxWxD) | 1 3/4" x 19" x 6" | ||
(mm) | (44 x 482 x 153) | ||
|
|
|
|
Weight, LBS(kg) |
| 4.18(1.9) | |
|
|
|
|
Limited Warranty
All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchaser of the amplifier.
Should the unit fail due to factory defects in material or workmanship, your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return Hotline at (718)
When returning the unit to us for warranty service, it must be carefully packed and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
•A copy of your sales receipt or other proof of purchase
•A brief letter, indicating the problem you are experiencing with the product
•Include in your letter your return address, daytime phone number and R.A. number
•Also include a check or money order for $15.00 for return shipping, handling and insurance, or provide your Visa/MC number with expiration date.
Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid. This warranty will be considered void if the unit was tampered with, improperly serviced or subject to misuse, neglect or accidental damage.
Please complete warranty card, detach and return
Here
Stamp
Place
Audio, Inc. | Street | NY 11204 |
PYLE PRO | 1600 63rd | Brooklyn, |
4 – PYLE PRO PDSP850 Owner’s Manual | PYLE PRO PDSP850 Owner’s Manual - 5 |