End

NOTE

The following instructions are for countertop mounted fittings only.

(Silhouette single bowl shown)

Apply a bead of sealant to the edge of the sink. Hold the

Countertop

Cutout

Drill a clearance hole inside the cutout line.

Countertop

Template

Cutout

template

sink against the under-side of the countertop and rotate the clips to hold the sink in place. Snug the screws to hold the sink. Attach all the additional clips.

Edge

Sealant

41mm

(1-5/8)

Support Clip

Cut opening on cut line of the template.

Note - Formica counter- top installation only is illustrated. Contact your countertop distributor for the best method of cut- ting other materials such as marble, hard syn- thetics, etc.

Countertop

Template

Cutout

Mount the faucet and drain assembly following the manufacturer's instructions.

Countertop

Cut fitting holes in the countertop and remove the template.

Countertop

Template

Cutout

Connect supply lines to faucet finger tight, and carefully bend to engage with the supply stops. Tighten connections to faucet for secure seal.

	CAUTION		Proper fit
	Prior to beveling the countertop		Fitting
	Prior to beveling the countertop		Escutcheon
	edge, be sure that the fitting		Escutcheon
	edge, be sure that the fitting
	escutcheon does not extend		Countertop
	onto the curved portion of the
	countertop.
	countertop.

Attach at least four of the support clips to the
underside of the countertop as shown below. The
location of the clips should
be as shown in the sink	Cutout
diagram. The wood screws	Support
are for use in wood, plywood,	Clips
are for use in wood, plywood,
or particle board (drill
appropriate pilot hole).
The inserts supplied are
for use in marble or hard
synthetic material.

Connect drain assembly
hand tight to check align-
ment. It may be necessary
to cut off part of the tailpiece	A	B
(area "A") or part of the		B
(area "A") or part of the
horizontal leg of the trap
(area "B").
Secure joint for watertight
assembly.

Trap	Trap

Single Bowl

Double Bowl

7 9 0 0 8 8 - 1 0 0 R E V . H

7182.001, 7182.000, 7182.803 specifications

The American Standard 7182 series encompasses three refined bathroom faucets: the 7182.001, 7182.000, and 7182.803 models. These faucets are designed to deliver a harmonious blend of both style and functionality, making them ideal for modern bathrooms while retaining a classic touch.

One of the prominent features of the American Standard 7182 series is its WaterSense certification. This certification signifies that these faucets are designed to save water without sacrificing performance. By utilizing a flow rate of 1.2 gallons per minute, these faucets not only conserve water but also contribute to lower utility bills. This emphasis on sustainability makes the American Standard 7182 series a smart choice for eco-conscious homeowners.

The design of the 7182 models is another standout aspect. With sleek lines and a polished finish, these faucets easily complement a variety of bathroom styles—from contemporary to traditional. The 7182.001 features a bold, angular spout that adds a modern edge, while the 7182.000 presents a more rounded, soft silhouette perfect for classic aesthetics. The 7182.803 introduces a unique cross handle design that provides a vintage charm, appealing to those who appreciate retro decor.

In terms of technology, the American Standard 7182 series incorporates solid brass construction, which ensures durability and longevity. This robust material is resistant to corrosion, making these faucets a reliable choice for daily use. To enhance user experience, the faucets come with a ceramic disc valve that offers a drip-free performance and smooth operation. This technology not only prevents leaks but also ensures consistent water temperature control.

Installation of the 7182 faucets is straightforward, as they are designed to fit a standard three-hole configuration, making them compatible with most sinks. Additionally, these models come with all the necessary mounting hardware and clear instructions, allowing homeowners to install them with ease.

In summary, the American Standard 7182.001, 7182.000, and 7182.803 faucets stand out due to their stylish designs, water-saving features, durable materials, and advanced technology. Whether you prefer a modern or traditional look, this series offers versatile options that enhance any bathroom space while promoting environmental responsibility. With these faucets, homeowners can enjoy both aesthetic appeal and practical benefits for years to come.