Swing Spout Assembly, Service | American Standard 7190.132

		SWING SPOUT ASSEMBLY
			Turn off hot and cold water
		CAUTION
			supplies before beginning.

Apply the grease (provided) liberally to the

SPOUT O-RING (1) and SNAP RING (2) areas.

Assemble the SPOUT (3) and tighten the

SPOUT NUT (4) until snug on VALVE BODY.

FITTING INSTALLATION

Remove LOCKNUT (1), BRASS WASHER (2), and

GASKET (3) from ﬁtting.

Place RUBBER RING (4) in recess of ﬁtting.

Insert inlet hoses and THREADED SHANK through hole of sink making certain RUBBER RING (4) is properly seated in the recess of the ﬁtting base.

Assemble GASKET (3), BRASS WASHER (2), and LOCKNUT (1) onto the THREADED SHANK from underside of sink deck.

Tighten the LOCKNUT (1) securely.

Connect the hot water supply to the left inlet hose and the cold water supply to the right inlet hose using appropriate connectors.

RECESS

3 1

	HOT
FLEXIBLE	COLD
INLET HOSES	COLD

TEST INSTALLED FAUCET

Remove AERATOR.

Operate both handles to ﬂush water lines thoroughly. Checkspout mounting and hose connections for leaks.

With handle in OFF position, turn on water supplies and check all connections for leaks.

Turn handles into OFF position and replace AERATOR.

SERVICE	2	90p
To change direction of handle rotation,		1

proceed as follows:

Turn valve to OFF position.

Remove INSERT and HANDLE SCREW.

Slip HANDLE with ADAPTER off.

Remove SPRING CLIP (1).

Lift STOP WASHER (2), turn 90p and replace.

Replace SPRING CLIP (1).

Replace ADAPTER, HANDLE, SCREW, and INSERT.

AERATOR may accumulate dirt causing distorted and reduced water ﬂow. Remove AERATOR and rinse clean.

If spout drips, operate handles several times from OFF to ON position. Do not force - handles turn only 90p.

Plastic SCREEN (3) in CARTRIDGE (4) may accumulate dirt causing reduced water ﬂow. To clean, ﬁrst turn off hot and cold water supplies, then:

	Remove INSERT and HANDLE SCREW.	4


	Slip HANDLE with ADAPTER off.


	Unscrew CARTRIDGE (4) with wrench.


	Thoroughly rinse plastic SCREEN (3) at


	base of CARTRIDGE (4).
	Replace CARTRIDGE (4) until ﬂange is	3


	tight against valve body.
	Turn valves OFF.
	Turn valves OFF.

Replace ADAPTER, HANDLE, SCREW,

and INSERT.

EverClean™ Finish Care Instructions

American Standard’s EverClean ﬁnish will wipe clean with a soft, dry cloth. A soft cloth with clean water may also be used, if desired. No additional cleaning products are required.

DO NOT USE: Soaps, acid, polish, abrasives, harsh cleaners, or a cloth with a coarse surface.

. 3 F W

7190.132 specifications

The American Standard 7190.132 is a popular two-handle, widespread bathroom faucet designed to bring both functionality and style to any bathroom setting. Known for its classic design, this faucet effortlessly complements a variety of bathroom decors, ranging from traditional to modern.

One of the standout features of the American Standard 7190.132 is its dual-handle configuration. This allows users to precisely control water temperature and flow, enhancing ease of use and efficiency. The ergonomic design of the handles ensures a comfortable grip, making adjustments straightforward, even with wet hands.

In terms of technology, the faucet is equipped with American Standard's patented Ceramic Disc Valve Technology. This advanced system ensures a drip-free performance, significantly reducing the likelihood of leaks and extending the faucet's lifespan. The ceramic discs create a tight seal, providing smooth turning action and eliminating the wear that is common with traditional rubber washers.

The 7190.132 also prioritizes water conservation. It comes with a WaterSense certification, meaning it meets or exceeds EPA criteria for water efficiency while still delivering exceptional performance. Typically, it offers a flow rate of 1.2 gallons per minute, promoting sustainable water usage without compromising pressure.

The finish of the American Standard 7190.132 is another highlight. It is available in a range of durable surface options, including polished chrome and brushed nickel. These finishes not only enhance the aesthetic appeal but also resist tarnishing and corrosion, ensuring long-lasting beauty and easy maintenance.

Installation is made easy with the standard 8-inch widespread configuration, making it compatible with a vast majority of sink designs. The faucet is also equipped with flexible supply lines that simplify the connection process, allowing for straightforward DIY installation.

Overall, the American Standard 7190.132 combines timeless design with modern technology and practicality. With its durable construction, efficient water usage, and user-friendly features, this faucet stands out as a reliable choice for homeowners looking to upgrade their bathroom fixtures while maintaining an appealing style.