3.Connect the black ground wire to a chassis ground, such as a metal screw attached to a metal part of the vehicle's frame. Be sure that the screw is not insulated from the chassis by a plastic part.
4.Connect the yellow memory back up wire (with
This connection provides power for the CD changer and its components, and continuous power for the CD changer's memory when the ignition is turned off.
CAUTIONS: The CD changer cable's plugs fit only one way into the Audio Adapter and CD changer. Do not force them. The recess mark on the metal rim of the DIN plug should face down.
To disconnect the CD changer cable from the Audio Adapter and CD changer, squeeze each plug, then gently pull it out.
Never pull on the CD changer cable.
Connecting The CD Changer Controller
To connect the CD changer controller to the Audio Adapter, insert the CD changer controller cable's plug into the
CAUTIONS: The plug fits only one way into the Audio adapter. Do not force it. The Oval recess mark on the metal rim of the DIN plug should face down.
To disconnect the controller from the Audio Adapter, gently pull it out.
Never pull on the controller's cable.
Testing The Connections
Make sure all connections are secure before continuing with the installation. Then reconnect the cable to the vehicle battery's negative
Verify that you connected the CD changer correctly by turning on the changer and playing a CD. Try to use the remote control by pointing the front towards the wired CD changer controller and pressing PLAY/PAUSE or