American Standard 9440.000 Packed QTY Description, American Standard ONE-YEAR Limited Warranty

Page 3

5

Connect the trap to drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area "B") or part of the horizontal leg of the trap (area "C").

Connect hot and cold supply lines between the fitting valve and the supply shut-off valves. Tighten trap joints for watertight assembly. Apply a bead of caulk around the back edge of the sink where it contacts the wall.

C

B

CARE INSTRUCTIONS: Rinse the product clean with clear water. Dry with a soft cotton flannel cloth.

DO NOT: Clean with soaps, acid, polish, abrasives, harsh cleaners, or a cloth with coarse surface.

9441 WASHSTAND REPLACEMENT COMPONENTS LIST

 

PART NO.

PACKED QTY.

DESCRIPTION

 

730730-0200A

1

Front Leg-White

 

730731-0200A

1

Rear Leg-White

 

730730-3290A

1

Front Leg-Warm Walnut

 

730731-3290A

1

Rear Leg-Warm Walnut

 

730732-0020A

1

Chrome Knob

 

730732-2950A

1

Satin Chrome Knob

AMERICAN STANDARD ONE-YEAR LIMITED WARRANTY

If inspection of this American Standard plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model.

This warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a local building or plumbing contractor to insure local code compliance before installation.

This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped by American Standard.

American Standard's option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation, nor shall American

Standard be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may not apply to you.)

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this warranty does not

affect such statutory rights.

AMERICAN-STANDARD WOOD FURNITURE WARRANTY

If inspection of this American-Standard plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American-Standard will repair or, at its option, exchange the product for a similar model. Variations in actual wood color and finishes which may result from natural characteristics of the wood, such as grain patterns, mineral streaks and the like, are not defects and are not covered by this warranty.

This warranty applies only to the original purchaser and installation of these products.

This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a local building or plumbing contractor to insure local code compliance before installation.

This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damages; if it was not installed in accordance with American-Standard’s instructions; or if it has been modified in a manner inconsistent with the product as shipped by American-Standard.

American-Standard’s option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation, nor shall American-Standard be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may not apply to you).

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or province to province, in which case this warranty does not affect such statutory rights.

For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through whom the product was purchased, or that a service request (including a description of the product model and of the defect) be sent to the following address:

In the United States:

American Standard Inc.

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of Consumer Affairs

For residents of the United States, warranty information may also be obtained by calling the following toll free number: (800) 442-1902

 

In Canada:

 

 

In Mexico:

 

American Standard

Customer Service Manager

2480 Stanfield Rd.

Ideal Standard, S.A. de C.V.

Mississauga, Ontario

Via Morelos #330

Canada L4Y 1S2

Col. Santa Clara

Toll Free: (800) 387-0369

Ecatepec 55540 Edo. Mexico

 

 

 

- 3 -

7 3 0 8 0 5 - 1 0 0

Image 3
Contents Washstand Table Legs Standard Washstand TOPWashstand Assembly American Standard ONE-YEAR Limited Warranty AMERICAN-STANDARD Wood Furniture WarrantyPacked QTY Description

9440.000 specifications

The American Standard 9440.000 is a popular and highly regarded sink faucet, designed with both functionality and aesthetics in mind. This faucet combines sleek, contemporary looks with advanced features that enhance the user experience in the kitchen or bathroom.

One of the main features of the American Standard 9440.000 is its ergonomic design, which greatly simplifies operation. The single-handle lever allows for easy control of both water temperature and flow, making it user-friendly for individuals of all ages. The spout has a high arc that not only adds to the modern aesthetic but also provides ample space for filling large pots and handling various kitchen tasks, or for effective washing in a bathroom setting.

Another notable characteristic of this faucet is its durable construction. Made with quality materials, the American Standard 9440.000 is designed to withstand daily wear and tear. Its finish is resistant to tarnishing and flaking, ensuring the faucet continues to look great over time without the need for frequent maintenance.

The faucet is equipped with American Standard's innovative technologies that enhance performance and efficiency. The ceramic disc valve is a standout feature that provides a lifetime of drip-free performance. This technology helps to prevent leaks and allows for smooth operation of the water flow, contributing to water conservation efforts.

Additionally, the 9440.000 model is compatible with standard plumbing setups, making installation straightforward for professionals and DIY enthusiasts alike. The inclusion of a comprehensive installation guide assists users in mounting the faucet with ease.

American Standard takes pride in not only the functionality and design of the 9440.000 faucet but also in its commitment to sustainability. The faucet is designed to reduce water consumption without sacrificing performance. It meets or exceeds the EPA's WaterSense criteria, which promotes the use of water-efficient products.

In summary, the American Standard 9440.000 is a well-rounded faucet that combines modern design with practical technologies. Its durable construction, ease of use, and eco-friendly features make it a favored choice for homeowners looking to enhance their living spaces. Whether installed in a kitchen or bathroom, this faucet delivers both style and efficiency for everyday tasks.