Sanus Systems NFCD manual Supplied Hardware Full Size Cam H, Plastic Dowel J, Diagram

Page 2

Supplied Hardware: (Full Size)

Cam - H	Cam Pin - I	Plastic Dowel - J
Qty. 4	Qty. 4	Qty. 4

Machine Screw - K	Wood Screw - L	Shelf Pin - M
Qty. 4	Qty. 4	Qty. 56

Step 1 - Attach Feet to NFCD Base

Insert a Machine Screw (K) into each Foot (C); then using the regular screwdriver, attach the Feet to the NFCD Base (B).

Diagram 1

B

C CC

K C K

KK

Step 2 - Insert Cam Pins into Side Panels

There are two holes that are centered on each side of the Side Panels (E), and 12” [304.3 mm] from each end. Using the phillips screwdriver, screw Cam Pins (I) into the two holes of each Side Panel taking care not to over tighten the Cam

Pins.

Diagram 2

E

E

I

Image 2

Contents Assembly Instructions for Model Nfcd Qty Sanus Name Plate GSupplied Hardware Full Size Cam H Diagram Insert Cam Pins into Side PanelsDiagram Plastic Dowel JInsert Cam into Center Support Secure Side Panels to Center SupportDiagram Attaching Nfcd Base Assembly Attaching Nfcd Top PanelInstalling Glass Shelves Diagram Attach Name Plate