Connecting Your System, Cabinet Maintenance

ENGLISH

www.pioneerelectronics.com

CONNECTING YOUR SYSTEM

IMPORTANT: Make sure all equipment is turned off before making any connections.

Correct wiring of your loudspeakers is essential for achieving the best sound quality. Be careful to ensure proper polarity of connection. We recommend a minimum of 18 gauge for runs up to 25 feet, and thicker for longer runs.

Most loudspeaker cable is coded to ease this task. Typically the ribbed or striped side is connected to the positive (red) terminal. Make sure that the ampliﬁer positive (red) terminal is connected to the loudspeaker positive (red) terminal. Strip off ½” of the insulation from the ends of the cable, twist the bare strands and insert into the binding posts. Take care that no stray strands of wire short across between the terminals.

	Negative	Positive
		Wire going to positive
	Wire going to negative	terminal of receiver
	Wire going to negative
	terminal of receiver
1: Strip the cover and twist the strands	2: Connect each speaker cable (not supplied) to one set of

the receiver’s speaker output terminals and the speaker input terminals. The red terminal is the positive (+), and the black

terminal is the negative (–). Make sure that the receiver positive (red) terminal is connected to the speaker positive (red) terminal.

PLACEMENT AND FINE TUNING

Correct placement is important for maximizing the sound quality of your loudspeaker system. Take time to experiment with positioning according to the guidelines below.

Using the SP-BS41-LR as Front and Surround Speakers

For best results the tweeter should be positioned near ear level and the loudspeakers separated a distance approximately equal to the listening distance. Angling the loudspeakers inward towards the listener will improve the image stability for non-central listeners. Close proximity to a side or rear wall will enhance the bass performance, although too close (particularly a corner location) and the bass may be unnaturally high and image performance may be degraded. Best results will be obtained when the loudspeaker is placed approximately 2 feet from the wall. If a corner location in unavoidable, try to position the loudspeaker so that the distance to the rear wall is not equal to the distance to the side wall.

ENGLISH

www.pioneerelectronics.com

INSTALLATION PRECAUTIONS

•Do not install this speaker system near a stove or other heating appliance, or put it in a place exposed to the sun. Such locations may cause the cabinet to change color and the speaker system to break down.

•Remember that the SP-BS41-LR is quite heavy, so it is dangerous to install it in high places such as on walls or pillars or in the other unstable locations unless suitably secured in place.

Pioneer will not be responsible for any accidents or damage that may result from improper installation.

If the speaker system is installed too close to the screen of a television set, color distortion may occur.

If this happens, turn off the power switch of the television set, and turn it on after 15 to 30 minutes. If the problem persists, place the speaker system away from the television set.

CABINET MAINTENANCE

•Use a polishing cloth or dry cloth to wipe off dust and dirt.

•When the cabinet is very dirty, clean with a soft cloth dipped in some neutral cleanser diluted ﬁ ve or six times with water, and then wipe again with a dry cloth. Do not use furniture wax or cleaners.

•Never use thinner, benzine, insecticide sprays and other chemicals on or near the cabinets, since these will corrode the surfaces.

SP-BS41-LR specifications

PYLE Audio SP-BS41-LR is a remarkable bookshelf speaker designed to deliver exceptional audio performance in a compact form. Known for its versatility, this speaker is ideal for home theater setups, music listening, and even gaming experiences.

One of the standout features of the SP-BS41-LR is its 4-inch high-efficiency midrange driver. This driver ensures that the sound produced is rich and detailed, allowing users to enjoy crystal-clear vocals and nuanced instrumental overtones. Coupled with a 1-inch silk dome tweeter, the speaker provides a well-balanced sound profile that captures the highs and lows with accuracy and depth.

The design of the SP-BS41-LR is both modern and functional. The speakers come in a sleek black finish that can seamlessly integrate into any home decor. The compact size allows them to fit neatly on bookshelves, desks, or stands without occupying significant space.

In terms of technology, the PYLE SP-BS41-LR employs advanced sound engineering techniques to minimize distortion and enhance clarity. This results in an immersive sound experience that rivals larger, more cumbersome speakers. The rear bass reflex port adds to the speaker’s low-frequency response, providing a deeper bass that can be felt as much as it can be heard.

Setting up the SP-BS41-LR is straightforward, thanks to its user-friendly design. The binding posts accommodate various connection types, making it compatible with a wide range of amplifiers and receivers.

Moreover, the speakers are designed for durability. The sturdy construction not only protects the internal components but also contributes to a consistent acoustic performance over time.

Overall, the PYLE Audio SP-BS41-LR bookshelf speakers are an excellent choice for anyone looking to enhance their audio experience without breaking the bank. With their powerful sound, sleek design, and advanced technologies, they stand out as a reliable option for both casual listeners and audiophiles alike. Whether you're watching your favorite movies or listening to your favorite albums, the SP-BS41-LR promises to deliver an enjoyable and immersive audio experience.