Peripheral Electronics PGHGM3 owner manual Installation

Page 5

OFF

ON

Fig. 1 Side view of interface with dip switches in correct position

5. Installation

1.When making electrical connections we always recommended discon- necting the vehicle’s battery from the electrical system before performing the installation.

2.Carefully remove the trim panels covering the 7mm bolts that secure the radio into the dash cavity. Remove these bolts, and carefully pull the radio from the dash of the vehicle. This will provide access to the factory radio connectors where you will connect the Media Gateway harness.

3.Disconnect the factory 24-Pin harness and 12-Pin harness from the back of the radio (if present). Disconnect the antenna from the radio.

4.Connect the 8-Pin iPod docking cable into the first port on the Media

Gateway (farthest away from dipswitches). Carefully run the 11 foot iPod cable behind the dash to the location where the iPod will be mounted or stored (for example the glove box or center console). This location will vary based on the vehicle, and the customer’s prefrence. When running this cable through the dash be sure to secure it away from moving parts or sharp metal edges that may damage the cable.

5.If connecting the HD Radio Tuner (HDRT sold separately), make the following connections before connecting the PXAMG to the vehicle. Plug the 3 foot HD Radio Cable (8-Pin mini-din to 8-Pin mini-din) into the second port (closest to the dipswitches) on the Media Gateway. Connect the other end of this cable into the HD Radio tuner. Connect the fac- tory antenna cable into the antenna connection on the HD Radio tuner (HDRT) Using a BestKits BAA5 antenna adaptor or eqivilalent if needed to make this connection.

6.Locate the 24-pin and 12-pin male connectors on the PGHGM3 har- ness, plug these connectors into the back of the radio. Plug the Black micro-fit 24-pin connector on the PGHGM3 harness into the PXAMG Media Gateway box.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents IPod Table of Contents Media Gateway & Optional Add-ons Introduction Compatibility Dipswitch SettingsSide view of interface with dip switches in correct position InstallationIPod Operation Entering Mode Select MenuPrevious Track Next TrackFast Forward RewindHD Radio Operation Press Preset #2 to select and play the desired songTune Up Seek UpSelecting AUX Input Factory Sat Operation TroubleshootingOne Year Limited Warranty Warranty Information

PGHGM3 specifications

The Peripheral Electronics PGHGM3 is an innovative solution designed for high-performance applications requiring reliable and efficient electronic components. This module stands out in the market due to its advanced technology, robust features, and versatility, catering to a wide range of industries, from telecommunications to consumer electronics.

One of the main features of the PGHGM3 is its compact design, which does not compromise on performance. Measuring only a fraction of its competitors, this module can fit seamlessly into tight spaces, making it an excellent choice for OEMs (Original Equipment Manufacturers) looking for space-saving solutions without sacrificing functionality.

The PGHGM3 also incorporates state-of-the-art power management technology, optimizing energy consumption while maintaining high output efficiency. This is particularly important for battery-operated devices, where extending battery life is a significant concern. The module’s ability to operate under various voltage scenarios adds to its adaptability, making it suitable for diverse applications.

In terms of connectivity, the PGHGM3 supports multiple protocols, including I2C, SPI, and UART. This wide array of communication options enables it to integrate easily with existing systems, simplifying the design and setup processes for developers. The module ensures reliable data transmission with minimal latency, addressing the demands of real-time applications.

Another standout characteristic of the PGHGM3 is its built-in safety features. It includes over-voltage protection, thermal shutdown, and current limiting functions, which collectively enhance the module's reliability and longevity. These features are essential in applications where electronics may be exposed to challenging conditions, ensuring the stability and durability of the device over time.

Moreover, the PGHGM3 is designed with a user-friendly interface that facilitates easy configuration and control. This feature provides developers with the flexibility to customize functionality to meet specific project requirements, ultimately accelerating the time-to-market for new products.

In conclusion, the Peripheral Electronics PGHGM3 is a highly functional and versatile module that provides numerous advantages in terms of performance, efficiency, and connectivity. Its compact design, robust safety features, and user-friendly interface make it an attractive option for manufacturers looking to enhance their electronic offerings in an increasingly competitive market. With the PGHGM3, designers can ensure they are leveraging cutting-edge technology to deliver superior products.
Top Page Image Contents