Preparation and Basics

1.Before installing or removing the flashtubes and modeling lamps, be sure this appliance is turned off, cooled and unplugged from AC power source and external power supply.

2.Do not operate this appliance with a frayed or damaged cable

3.Do not attempt to use this appliance if it has been dropped or damaged, until a qualified service person has serviced it.

4.Do not operate the unit with a damaged or broken flashtube or modeling lamp. Do not use flashtubes with broken, cracked or missing glass envelopes. To prevent damage always use Photogenic specified replacements for the flashtubes and modeling lamps.

5.Perform no internal service work on this unit. Refer all such service to a qualified service person or return to the factory. This will provide you safety and continuation of your warranty.

6.Do not operate when water is present and from extreme temperature shifts. If the unit is stored in hot or below freezing temperatures, allow at least one hour at room temperatures before using.

Unpacking and Setup:

Unpack all units carefully to remove all parts from the carton(s). Do not discard or destroy the packing material until the equipment has been inspected, assembled, and all parts accounted for.

After unpacking, all parts should be examined for any damage, which may have been caused by rough handling during shipment. If any damage is detected, contact the delivering carrier at once. Claim for damage should be made to the delivering carrier before destroying packing cartons.

Unpacking and Setup:

The unit is shipped with the modeling lamps and flashtubes not installed. While installing the modeling lamps and flashtubes (with glove or clean cloth to protect the hand) be sure they are properly inserted and tight to avoid arcing and failure of the socket contacts during operation. Always use a clean cloth or wear gloves to protect your hand from glass breakage and heat. Place the unit on a stable flat surface, face up.

The diffusion panel is held in place with an “L” bracket and thumbscrews. Remove the thumbscrews and “L” bracket. Slide out the diffuser panel. The paper protective sheet must be peeled off the diffusion panel. Use finger nails to start peeling at two corners and continue carefully peeling protective sheet until it is all removed. Do not use razor blade or other mechanical scrapers.

The fluorescent lamps have no polarity. Remove any plastic film from reflector. Install by inserting the glass body into the clear support bracket, and then insert the pins into the top of the socket holes and press base down to snap pins into contacts.

CFF4, CFF2, CFF8 specifications

Photogenic Professional Lighting offers a range of products designed for both professional and aspiring photographers, with the CFF series standing out as a remarkable line of lighting solutions. Among these, the CFF8, CFF4, and CFF2 models are built to enhance any photography scenario, from studio shoots to on-location setups.

The CFF8 model is a powerhouse of productivity, designed to deliver consistent and even lighting. One of its main features is the high-quality flash head that produces a stable color temperature of 5600K, ensuring that the light remains constant across multiple bursts. This model is particularly celebrated for its quick recycling time, allowing photographers to capture multiple shots in rapid succession without the worry of lighting inconsistencies. The CFF8 incorporates advanced LED indicators that help users gauge the power level and recycle time, providing feedback at a glance.

Moving to the CFF4, this model balances power and portability. It is equipped with a smaller form factor but does not compromise on performance. The CFF4 utilizes the same reliable color temperature technology, while its weight makes it a favorite among photographers who frequently travel for shoots. The built-in overheat protection feature ensures the unit operates safely during extended sessions, thereby enhancing its longevity and reliability in various conditions.

The CFF2 model is designed with minimalism in mind, making it an ideal choice for both beginners and professionals who prefer an easy setup. Despite its compact size, the CFF2 still offers an impressive output that can compete with larger models. It's equipped with a user-friendly interface, allowing even novice photographers to adjust settings effortlessly. Additionally, the CFF2's versatility is ideal for small studio spaces or dynamic environments where flexibility is key.

All three models in the CFF lineup utilize photometric sensors to deliver superior performance. These sensors assist in achieving optimal lighting conditions, helping photographers make precise adjustments based on their shooting needs. The durability of the materials used in construction ensures that these lighting systems can withstand the rigors of regular use.

In conclusion, the CFF8, CFF4, and CFF2 by Photogenic Professional Lighting are crafted to cater to various lighting needs while ensuring reliability and performance. Whether for intricate studio setups or versatile on-the-go applications, these models represent a commitment to excellence, further empowering photographers to elevate their craft with professional-grade lighting solutions.