Part 3-Attaching brackets to screen
Center brackets vertically on back of screen. Select the small(A),medium (B or C) or large(D) screws. Attach brackets to screen using four selected screws and four square washers(E) at the top and bottom of each bracket. Tighten screws firmly. Do not overtighten.
Square washer(E)
Part 1a-Wood Stud Mounting
Use wall plate(1) as a template, make sure it is level, and mark three mounting holes on the wood studs. Drill three 3/16”(4.5mm)dia.holes 50
mmdeep. Level wall plate(1) and attach to wall with three long bolts(G) and three washers(F). Tighten screws firmly. Do not overtighten.
| E | |
Large hole for | ||
M8 screws | ||
| ||
Medium hole for |
| |
M5 and M6 screws |
| |
Small hole for |
| |
M4 screws |
|
Stud finder
Wood stud
50mm |
Φ3/16”(4.5mm) |
Magnetic removable bubble level
F G
|
|
|
|
|
| ||||