Stovax 7129 manual Opening the Doors, Never open the door with your bare hands

OPERATING INSTRUCTIONS

1.4As the fire becomes established add larger pieces of wood and close the Primary air control and control the burn rate using the Airwash air control only.

1.5To burn wood efficiently it is best to allow a bed od ash to build-up on the grate, and continue to control the combustion using the Airwash air control only.

1.6Before re-fuelling the appliance it is advisable to first rake the embers evenly over the firebed then open the Airwash air control fully for a few minutes, to establish a glowing bed before adding new logs.

1.7Allow the new logs to burn at high output for a few minutes before adjusting the burn rate with the Airwash air control to the desired setting. It is best to refuel little and often to maintain clean and efficient burning.

1.8The ideal control settings to suit the particular installation and personal preferences will be established by experience in using the appliance.

1.9It is not recommended to load large amounts of logs and burn with the Airwash air control on low settings for long periods of time. This will reduce the effectiveness of the glass cleaning effect of the Airwash air. Also this will cause a large build-up of tars and creosotes in the appliance and flue system.

We would recommend that the Stockton is burnt at high output for at least 30 minutes each day when it is in use. This will help reduce the build-up of tars and build-ups of tars and creosotes within the appliance.

2.OPENING THE DOORS

2.1To open the door, hook the tool provided over the door handle and rotate clockwise 1/4 turn. Do not force the handle to turn more than 1/4 turn as damage may occur.

2.2Never open the door with your bare hands.

2.3Closing the door is the reverse of the previous.

12