Trouble Shooting

Before going through the check list, finish wiring connection. If there still are any question after finish testing the items in the following list, consult your nearest service dealer.

Symptom	Cause	Solution

The compact	The volume control is turned	Turn up the volume control.
disc or tape	down.
does not play
does not play	The power connections are not	Check the +12V and ground
when inserted	The power connections are not	Check the +12V and ground
when inserted	wired correctly.	connections.
into the unit.	wired correctly.	connections.
into the unit.
The sound from	The road surface is rough.	Wait for the road surface to
the CD player		improve before playing a disc.
skips.
skips.	The unit is not mounted	Install the unit securely. Be sure to
	The unit is not mounted	Install the unit securely. Be sure to
	securely.	use the rear strap if the vehicle
		does not provide support for the
		rear of the unit.

	The disc is defective.	Try another disc. If it plays properly,
		the first disc may be defective.
	The disc is dirty.	Clean the disc.

No power.	The vehicle ignition is switched	Switch the ignition to the "ON" or
	off.	"ACC" position.

	The fuse is blown.	Replace the fuse with another 15A
		fuse.

The unit does	The microcomputer has been	Eject the disc or tape, then insert it
not work	affected by electrical noise.	again.
properly (Eject,
properly (Eject,		Turn the power off and then on
Load, Play).		Turn the power off and then on
Load, Play).		again.
		again.

No radio	The antenna cable is not	Insert the antenna cable firmly into
reception.	connected.	the antenna jack on the unit.

The radio does	The signals are weak.	Select a station using manual tuning.
not stop on any
stations when
automatic
tuning is used.

4.DISC COMPARTMENT

5.TAPE COMPARTMENT

6.CD EJECT BUTTON

In CD player mode, press it to eject the disc.

7.TAPE EJECT BUTTON

In tape mode, press it to eject the tape.

8.POWER BUTTON

Press it to turn on or off the unit.

9.VOLUME MODE SELECTING AND LEVEL UP OR DOWN BUTTONS

Press SEL button to select the audio mode such as volume, bass, treble, balance and fader. Press the + or - button to adjust the sound level of them.

10-11-12-16-17-18. 1-6 preset memory buttons

Select the desired band, then tune for the station you want to store in memory, and then press and hold one of 1-6 preset memory buttons for more than 2 seconds to store the broadcasting station to the preset memory. Every preset memory button can be stored only one station for each band, so the car audio system can be stored 30 stations.

After finishing the storing operation, select the desired band and then press one or the six preset memory buttons to quickly tune for the desired station.

10.AMS BUTTON(Automatic Music Select System)

In tape mode, press AMS button to turn on the AUTOMATIC MUSIC SELECT SYSTEM. Then if you press FF or REW button, it allows you to skip forward or backward to the beginning of a particular selection.

Press AMS button again to cancel AMS mode.

11-12. DISC SELECTING BUTTONS

In CD changer mode, press the DISC + button to select the next disc and the DISC - button to select the preceding disc.

PLCDCS90 specifications

The PYLE Audio PLCDCS90 is an advanced car stereo system designed to enhance your in-car audio experience. This state-of-the-art unit comes packed with features that cater to both functionality and convenience, making it a top choice for car audio enthusiasts.

One of the standout features of the PLCDCS90 is its modern digital display. The stereo is equipped with a bright LCD screen, which not only displays track information, but also provides easy navigation through the unit's various functions. The interface is user-friendly, ensuring that drivers can access their favorite settings safely and with minimal distraction.

The PLCDCS90 supports a range of audio formats, including MP3, WMA, and WAV files, allowing you to enjoy your entire music library. For added versatility, the stereo features a front auxiliary input and USB port. These connections let you play music directly from your smartphone, tablet, or USB flash drive, providing endless options for music enjoyment on the road.

Another significant feature is Bluetooth connectivity, which enables hands-free phone calls and wireless audio streaming. This technology not only enhances safety by allowing drivers to keep their hands on the wheel, but also provides a seamless audio experience by connecting your devices effortlessly.

The sound quality of the PYLE Audio PLCDCS90 is impressive, thanks to its built-in amplifier with a peak power output of 320 watts. This means crisp, clear sound that can easily fill your car's interior. Plus, with customizable EQ settings, you can tailor the audio output to suit your music preferences.

The unit also includes a remote control, which grants you access to all of the stereo's functions without taking your eyes off the road. This added convenience makes it easy to change tracks or adjust settings even while driving.

The PYLE Audio PLCDCS90 is compatible with modern and older vehicles alike, making it a versatile addition to almost any car. With its sleek design and multiple functionalities, this car stereo system combines performance and style to deliver a superior audio experience on the go.