American Standard 0066.000, 0282.800 dimensions Retrospect Collection Pedestal Sink

RETROSPECT COLLECTION®

PEDESTAL SINK

FIRE CLAY

RETROSPECT COLLECTION® PEDESTAL SINK

•Authentically styled rectangle pedestal

•Made from fine fireclay

•Generous deck area for toiletries

•Hidden front overflow

•Supplied with mounting kit

•Right Height™ for greater comfort

•Part of design matched Retrospect Collection®

❏0282.800 Faucet holes on 8" (203mm) centers

Nominal Dimensions: 27" x 19-3/4" x 36"

(686 x 502 x 914mm)

Separate Components:
❏ 0282.008 Pedestal top 8" (203mm) centers		13-3/4"	3 Holes
❏ 0066.000 Pedestal only		(349mm)	1-3/8" (35mm) Dia.
		8"
	FINISHED WALL	(203mm)
Bowl sizes:			3-3/8"
	9"		(86mm)
15-1/2" (394mm) wide
	(229mm)		15"
12" (305mm) front to back
			(381mm)
6-1/8" (156mm) deep	1-3/4" DIA.		19-3/4"
			(502mm)
	STD. DRAIN
	OUTLET

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.9M for Non-Vitreous

27"

PED TOP OUTLINE

Ceramic Fixtures

• CAN/CSA B45 Series

(686mm)

To Be Specified:

❏Color: ❏ White

❏Recommended Faucet: 2373.701

❏Faucet Finish:

❏Supplies:

❏1-1/4" Trap:

© 2008 AS America Inc.

7-1/4"			8-1/8"
			TO BOTTOM
(184mm)		OF DRAIN OUTLET
			(206mm)
3/8" (10mm) DIA.	8"
	(203mm)
SINK ANCHOR		SUPPLIES
SCREW HOLES		AS REQ'D
ON 13-3/4" (349mm)
CENTRES	* 24"	1-1/4 O.D.			36"
		WASTE		(914mm)
(610mm)		1-1/4" O.D.	28-1/4"
	* 22"		(718mm)
		TAILPIECE
	(559mm)
FINISHED
FLOOR
		3/8" (10mm) DIA.			PEDESTAL
					SIDE SECTION
	9-7/8"	BASE ANCHOR
		SCREW HOLE
	(251mm)		CENTER

NOTES:

*DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED.

▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.

■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.9.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

J8

Revised 2/08