Napoleon Grills GVF36P, GVF36N manual GD65 FAN Installation, Thermostatic Sensor Control

Page 13

13

GD65 FAN INSTALLATION

ELECTRICAL INSTALLA- TION TO BE DONE BY A QUALIFIED INSTALLER and must be connected and grounded in accordance with local codes. In the absence of local codes, use the cur- rent ANSI/NFPA 70 NATIONAL

ELECTRICAL CODE.

FIGURE 24

If the fireplace was not previously equipped with a blower, route a grounded 2-wire, 60hz power cable to the junction box. At this point, it must be strain relieved and insulated.

The wire harness provided in this kit is a universal har- ness. When installed, ensure that any excess wire is con- tained, preventing it from making contact with moving or hot objects.

Position the vibration reducing pad into the clip and onto the threaded stud at the other end, piercing a hole into the pad. The fan assembly must be able to be positioned entirely onto the pad.

Slide the fan assembly past the controls and into the clip. Secure using the lock washer and nut provided. Plug the harness cord into the receptacle.

FIGURE 25

THERMOSTATIC SENSOR CONTROL

This optional kit is meant to be used only in conjunction with the GD65 Fan Kit, which may be ordered from your Wolf Steel /Napoleon dealer.

With the thermostatic sensor option, the fan, when turned on, becomes thermally activated, and will automatically run approximately 10 minutes after the fireplace has been lit and for approximately 30-45 minutes after the fireplace has been turned off.

Use of the fan increases the output of heat.

If optional thermostatic sensor kit is to be installed, re- move thermodisc from the bracket supplied in the kit and disgard the bracket. Install thermodisc in the bracket sup- plied with the fireplace. It is recommended to attach the wires to the disc and install the bracket before installing the blower. Attach the black and white wires to the disc, then secure the bracket to the stud at the bottom left on the unit using the lock washer and wing nut. Ensure that the thermodisc touches the firebox wall.

Unplug the power cord from the receptacle. Connect all wires as shown.

FIGURE 26

Plug the power cord back into the receptacle.

When installed, ensure that any excess wire is contained, preventing it from making contact with moving or hot ob- jects.

FIGURE 27

W415-0297 / D / 04.03.03

Image 13
Contents Unvented Millivolt System Table of Contents Napoleon GAS Fireplace Presidents Lifetime Limited Warranty General Information General InstructionsCare of Optional Glass DOOR, Catalytic Tiles & Plated Parts Carbon Monoxide Poisoning MAY Lead to DeathRoom InstallationDo not Kink Flex Connector GAS InstallationWire Size MAX. Length Using Door OptionFraming Nailing TAB InstallationMantle Clearances Finishing Hood Logo PlacementFlange Hoodclip Upperlouvre Door Latch Charcoal Embers LOG PlacementGlowing Embers Hood Bracket Slot Louvre Gvfl Louvre Installation L36 Louvre InstallationHood Upper LouvresOptions GVF103-KT Patented Catalytic Door InstallationCurtain ROD Bracket Curtain Support PlateWhite Optional Blower InstallationThermostatic Sensor Control GD65 FAN InstallationFor Your Safety Read Before Lighting Operation / MaintenanceCatalytic Tile Maintenance MaintenanceOxygen Depletion Sensor Pilot Cleaning Venturi AdjustmentReplacement Parts ReplacementsAccessories W415-0297 / D Symptom Problem Test Solution Trouble Shooting GuideDo not Clean Glass When HOT Fireplace Service History

GVF36P, GVF36N specifications

Napoleon Grills has long been synonymous with quality outdoor cooking, and the GVF36P and GVF36N models are no exception. Both grills offer exceptional performance and innovative features, making them ideal for serious barbecue enthusiasts and casual grillers alike.

The GVF36P and GVF36N are part of the Napoleon Prestige lineup, showcasing superior craftsmanship and design. These models are equipped with a powerful multi-burner system that delivers intense heat, allowing chefs to sear steaks and deliver restaurant-quality results in the comfort of their backyard. The highly efficient stainless steel burners ensure even heat distribution, minimizing hot spots and delivering consistent cooking temperatures.

One of the standout features of these grills is the iconic Napoleon infrared rear burner. This unique technology allows for perfect rotisserie cooking, enabling users to achieve beautifully cooked, juicy meats while sealing in flavors. Both models come with an included rotisserie kit, making it easy to elevate your outdoor cooking experience.

The GVF36P is specifically designed for propane fuel, while the GVF36N operates on natural gas, catering to a wide range of users and preferences. The dual fuel options make it highly versatile, allowing homeowners to choose the best fit for their outdoor setup.

In terms of construction, both models feature a robust, powder-coated steel frame and stainless steel components, ensuring durability and resistance to the elements. The cooking surfaces consist of cast iron grates that not only retain heat well but also provide ideal sear marks, enhancing the visual presentation of grilled foods.

Additional features include integrated LED lights in the control knobs, enhancing visibility during nighttime grilling, and a convenient side shelf for food preparation. The grills also come equipped with a built-in temperature gauge, allowing chefs to monitor their cooking without lifting the lid.

With a focus on ease of use, the GVF36P and GVF36N incorporate an electronic ignition system for reliable, quick starting, so you can get cooking without delay. The spacious cooking area provides ample room for preparing multiple dishes simultaneously, making it perfect for gatherings and entertaining.

In summary, the Napoleon Grills GVF36P and GVF36N are sophisticated grilling solutions that blend performance, technology, and durability. With their versatile fuel options, innovative features, and high-quality construction, these grills are designed to meet the needs of any grilling enthusiast, offering the perfect platform for unforgettable outdoor cooking experiences.