NEC NP600CM manual Tools Needed for Assembly, Table of Contents

Page 2

NOTE: Read entire instruction sheet before you start installation and assembly.

WARNING

Do not begin to install your Peerless product until you have read and understood the instructions and warnings con- tained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, call Peerless customer care at 1-800-729-0307.

This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions.

Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard- ware and components.

Never exceed the Maximum Load Capacity.

Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power. See suggested torque values where applicable within these instructions.

This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

 

CAUTION

 

 

• It is the responsibility of the installer to ensure that the

 

 

projector is properly ventilated.

 

Tools Needed for Assembly

 

stud finder ("edge to edge" stud finder is recommended)

 

phillips screwdriver

 

drill

 

1/4" bit for concrete surface

 

5/32" bit for wood studs

 

open end wrench

 

level

 

Table of Contents

 

Parts List

3

Installation to Extension Columns / Ceiling Plate

4

Installation to Wood Joist Ceilings

5

Installation to Concrete Ceilings

6

Installation to Threaded Rods

7

Attaching Adapter Plate to Projector

8

Attaching Adapter Plate to Projector Mount

9

Projector Alignment

10

 

2 of 10

ISSUED: 08-05-08 SHEET #: 056-9008-1

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.

Image 2
Contents NEC Display Solutions of America, Inc Model NP600CMTools Needed for Assembly Table of ContentsParts List Installation to Extension Column / Ceiling Plate Skip to stepInstallation To Wood Joist Ceilings Installation to Concrete Ceilings CorrectInstallation to Threaded Rod Attaching Adapter Plate to Projector Attaching Adapter Plate to Projector Mount Projector Alignment Side View

NP600CM specifications

The NEC NP600CM is a cutting-edge multimedia projector designed to deliver exceptional performance and versatility for a wide range of applications. Engineered for both educational and corporate environments, the NP600CM stands out with its impressive feature set and advanced technologies.

One of the key highlights of the NEC NP600CM is its brightness. With a light output of up to 6000 lumens, this projector ensures vibrant and clear images even in well-lit rooms. This feature makes it ideal for large classrooms, conference rooms, and auditoriums where ambient light can often interfere with visibility. The projector’s high contrast ratio enhances image quality further, providing deeper blacks and crisper whites for a more engaging viewing experience.

The NP600CM utilizes DLP (Digital Light Processing) technology, which is known for its reliability and superior color accuracy. This technology provides sharp and detailed images, making it suitable for presentations that require fine details to be visible. The projector also supports native resolution of XGA, ensuring that text and images are reproduced with clarity.

Connectivity is another strong suit of the NEC NP600CM. The projector comes equipped with multiple inputs, including HDMI, VGA, and USB ports, allowing it to connect easily to various devices such as laptops, tablets, and document cameras. This flexibility ensures that users can seamlessly share content from different sources without hassle.

Additionally, the NP600CM features advanced networking capabilities. It supports both wired and wireless connections, enabling users to control and monitor the projector remotely. This is particularly beneficial for IT administrators in educational institutions or businesses, as it allows for easy management of multiple devices from a central location.

Another notable characteristic of the NEC NP600CM is its energy-efficient design. The projector includes features like a filter-free design, which reduces maintenance costs, and eco-friendly lamp modes that help extend the lifespan of the lamp. This results in lower total cost of ownership over time.

In conclusion, the NEC NP600CM is a robust and versatile multimedia projector that is well-equipped to handle the demands of modern presentations. With high brightness levels, superior image quality, versatile connectivity options, and advanced features, the NP600CM is an excellent choice for educators and business professionals who seek reliability and performance. Its energy-efficient design further adds to its appeal, making it a smart investment for any organization.