Peerless Industries ONE-TP-S, RTONES manual Aa Aa, Mounting and Removing Flat Panel Screen

Page 11

Mounting and Removing Flat Panel Screen

WARNING

Always use an assistant or mechanical lifting equip- ment to safely lift and position the plasma television.

NOTE: For security, replace safety screw in each tilt bracket with M5 x 30 security screw (HH) using wrench (II).

Adjust brackets to full back tilt position and tighten. Hook tilt brackets (BB and CC) onto wall plate (AA). Then slowly swing screen in as shown. Turn safety screws, using wrench (II), clockwise till fully tightened down and screw tip securely contacts bottom of the wall plates as shown in detail 1. of figure 5.1. Center of screen can be adjusted horizontally no more than 4" from center of the wall plate configuration, if desired as shown in figure 5.2.

NOTE: To lock the screen down, tighten safety screws to wall plate using a wrench (II) as shown in detail 1.

To remove screen from mount, loosen safety screws, swing screen away from mount, and lift screen off of mount.

CAUTION

Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten screws to 40 in. • lb (4.5 N.M.) maximum torque.

CAUTION

Be careful not to pinch fingers when pushing screen from the bottom.

Adjusting the Tilt Angle of the Flat Panel Screen

Adjust tension knobs shown in detail 2 to desired tension, balancing your screen size and weight. The tension knob, without changing the bracket tension, can be pulled out, away from the bracket and turned independently of the knob post for readjustment as shown in Detail 3.

Push or pull from top or bottom of screen to adjust tilt as shown in figure 6.1. The tilt can be adjusted to a maximum of 15° forward or 5° backward.

BB and CC

AA AA

SAFETY

SCREW

DETAIL 1

fig 5.1

4"

CS

CS = center of screen

fig 5.2

LOCATOR

HOLE

TENSION

KNOB

TILT POSITION

 

IncreLok™

HOLES

DETAIL 2

TILT LOCKING

 

SCREW

TENSION

KNOB

NOTE: To lock the screen into the desired tilt

 

position, use locator hole to find tilt position hole.

fig 6.1

Tighten IncreLok™ tilt locking screws on both tilt

 

brackets as shown in figure 6.1 and detail 2.

DETAIL 3

11 of 33

ISSUED: 09-20-06 SHEET #: 202-9167-3 01-26-07

© 2006 Peerless Industries, Inc. All rights reserved. Onemount is a trademark and Peerless is a registered trademark of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

Image 11
Contents Features Installation and Assembly OneMountTable of Contents Tools Needed for AssemblyAccessories Iihh CC GGBB,CC Adjustment of Extension BracketsIssued 09-20-06 Sheet # 202-9167-3 For Flat Back Screen Issued 09-20-06 Sheet # 202-9167-3 Skip to step Installation to Double Wood Stud WallInstallation to Triple Wood Stud Wall AA EE Installation to Solid Concrete or Cinder BlockDD EE Mounting and Removing Flat Panel Screen Adjusting the Tilt Angle of the Flat Panel ScreenAA AA Características Instalación y Ensamblaje OneMountPara atención al cliente, llame al 800 729-0307 ó 708 Herramientas necesarias para el montajeAccesorios Lista de las partes Asegúrese de que las ranuras estén boca abajo Ajuste de los soportes de extensiónNotas Pantalla Arandela Múltiple Tornillo Ffgg Proceda al 5to paso Instalación a dos montantes en pared de maderaProceda al 5 to paso Instalación a tres montantes en pared de maderaHormigón Instalación en concreto sólido o bloques de hormigónDe la pantalla de panel plano Cómo montar y remover la pantalla de panel planoInstallation et montage OneMount Outils nécessaires au montage AccessoiresBB CC GG Liste des piècesRéglage des rallonges de support de fixation Remarques Pour les écrans à dos plat Ffgg Passez à l’étape Installation sur un mur à doubles montants en boisDD AA Passez à laInstallation sur un mur à triples montants en bois Incorrect Installation sur du béton plein ou du bloc de bétonRéglage de l’inclinaison de l’écran plat Montage et démontage d’un écran plat

RTONES, RTONE, ONE-TP-S, ONE-TP specifications

Peerless Industries, a leader in AV solutions and professional display technology, offers a range of innovative products, including the ONE-TP, ONE-TP-S, RTONE, and RTONES models. These cutting-edge offerings cater to diverse needs in the modern workplace, educational environments, and home entertainment systems.

The ONE-TP model is designed for seamless integration in various applications. Its main feature includes a versatile mounting system that provides a stable base for displays. The ONE-TP-S variant takes this a step further by incorporating a sleek design that complements contemporary aesthetics while maintaining robust functionality. Both models utilize advanced tilt and swivel capabilities, allowing users to adjust their screen orientation effortlessly. This flexibility is crucial in multi-purpose settings where viewing angles can vary dramatically.

The RTONE and RTONES models focus on enhancing audio performance alongside visual capabilities. RTONE is engineered with integrated audio technology ensuring that users experience superior sound quality that matches the outstanding visual display. This model includes built-in amplifiers and outputs suitable for any professional setup, eliminating the need for additional external sound systems. The RTONES variant elevates this innovation by offering advanced audio processing features. It is designed for environments where high-fidelity sound is essential, such as auditoriums, boardrooms, and immersive home theaters.

Both RTONE and RTONES incorporate the latest in wireless connectivity technologies, enabling seamless integration with a variety of devices for presentations, streaming, and other multimedia applications. The intuitive user interface simplifies the interaction process, making it accessible for individuals of all technical backgrounds.

Additionally, these models boast energy-efficient designs and sustainable materials, making them environmentally friendly choices for tech-savvy consumers and organizations aiming to reduce their carbon footprint. With their robust build quality, these products ensure longevity, significantly lowering maintenance costs over time.

In summary, Peerless Industries' ONE-TP, ONE-TP-S, RTONE, and RTONES models represent a convergence of sleek design, advanced technology, and user-centric features. They cater to a broad spectrum of needs, enabling enhanced visual and audio experiences across various settings. Whether for corporate, educational, or personal use, these models stand out as a testament to Peerless Industries' commitment to innovation and excellence in AV solutions.