Introduction, Important Safety Measures, Fitting

INTRODUCTION

To get the best out of your fan, please read these instructions carefully before using it for the first time.

We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of the fan.

IMPORTANT SAFETY MEASURES

•Please ensure that the voltage of the fan corresponds to the mains voltage.

•Use the fan only for the purpose(s) defined in the user guide.

•Never insert your fingers, pencils or other objects through the cage during operation.

•Switch the fan off before moving or cleaning it.

•The fan should be set up on a stable and level surface to avoid it being knocked over.

•Do not expose the fan to excessive heat or humidity, as this can cause damage to the electrical components.

•Do not immerse in any form of liquid.

•It is not advisable to expose people, in particular babies and the elderly, to a continuous stream of cold air.

•The fan should be kept out of the reach of children.

•Ensure that the cable does not get caught beneath the device, in drawers, behind shelves etc.

•Do not run the cable under carpets, rugs, etc.

•Ensure the cable is kept away from busy areas to avoid anyone tripping over it.

•Do not use if the device or cable becomes damaged. Take it to a specialist for repair.

•For indoor use only.

OVERVIEW OF FUNCTIONS

10.

12.

5. 4. 11. 3. 7.

1.Ventilator head

2.Base

3.Rear cage

4.Nut for rear cage

5.Motor shaft

6.Blade

7.Nut for blade

8.Front cage

9.Clip

10.Oscillation button

11.Adjusting screw

12.Control panel

FITTING:

1.Fit the base using the accompanying screws (the cable should be led out through the cable outlet under the base).

2.Place the rear cage on the ventilator head (3 pins on the ventilator head fit into 3 holes on the rear cage).

3.Screw the rear cage on so that it

fits tightly to the ventilator head (turn the lock (4) clockwise).

4.Put the blade on the motor shaft (one pin on the motor shaft fits into 2 holes on the rear of the blade).

5.Put the blade lock on the motor shaft and tighten it so the blade is tightly attached (turn the lock (7) clockwise).

6.Place the front cage together with the rear cage by first hooking it tight at the top. Attach the front cage by clicking the clips down over the edge of the front and back cages. Finally tighten the back and front cages together with the small screw and nut.

USE:

WARNING:

In order to reduce the risk of fire or electric shock, never use the appliance together with an electronic timer.

Speed:

Select the speed using the buttons on the control panel.

Press "0" to switch the fan off. Press "1", "2" or "3" to select the speed.

Rotation:

The fan can turn from side to side or can be locked in a specific direction by using the oscillation button on top of the fan head. Press the button to start the fan turning and pull it up against to stop it turning.

In order to select a particular direction for the fan to blow in, lift the oscillation button and turn the fan head.

Vertical (up/down) control of the fan head:

To adjust the angle of the fan head vertically, loosen the adjusting screw and tilt the fan head up and down. When the required angle is reached, tighten the screw again.

CLEANING

•Always switch the fan off and unplug it before cleaning.

•Clean the plastic parts using a damp cloth and a mild detergent, and ensure that all detergent residue is removed.

•Never use abrasive cleaning agents or solvents.

•Do not immerse in any form of liquid.

THE GUARANTEE DOES NOT APPLY

•If the instructions given above are not observed.

•If the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage.

•For faults that may have arisen as a result of faults in your electricity supply.

•If the appliance has been subject to unauthorised repairs.

Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.

IMPORTER

Adexi Group

We cannot be held responsible for any printing errors.

671-106 specifications

Melissa 671-106 is an innovative and advanced synthetic material that has gained significant attention in various industrial applications. Renowned for its impressive mechanical properties and versatility, this material stands out among its peers in terms of reliability and performance.

One of the main features of Melissa 671-106 is its exceptional durability, which allows it to withstand harsh environmental conditions. Whether subjected to extreme temperatures, corrosive chemicals, or heavy wear and tear, Melissa 671-106 maintains structural integrity, making it an ideal choice for demanding applications.

The technology behind Melissa 671-106 involves a unique polymer blend that enhances its strength and flexibility. This proprietary composition offers a remarkable balance between rigidity and elasticity, enabling it to absorb shocks without permanent deformation. As a result, products utilizing Melissa 671-106 can ensure longevity even in challenging situations.

Another characteristic that sets Melissa 671-106 apart is its lightweight nature. Compared to traditional materials such as metals or ceramics, this synthetic compound is significantly lighter, which can lead to reduced energy consumption in transportation and manufacturing processes. This lightweight aspect also makes it easier to handle and process, further increasing its appeal to engineers and manufacturers.

Furthermore, Melissa 671-106 exhibits excellent thermal stability. This feature allows it to maintain performance in high-temperature environments, making it suitable for applications in industries such as automotive, aerospace, and electronics. The material's heat resistance ensures that it does not degrade or lose functionality when exposed to elevated temperatures.

Another notable quality of Melissa 671-106 is its ease of fabrication. It can be molded, extruded, or processed using a variety of techniques, offering great flexibility for manufacturers. This adaptability lends itself to producing components of different shapes and sizes, catering to specific requirements across different sectors.

Finally, Melissa 671-106 is designed with sustainability in mind. Many variants of the material are produced using eco-friendly methods and can be recycled at the end of their lifecycle, minimizing environmental impact.

In summary, Melissa 671-106 is a highly durable, lightweight, and versatile synthetic material characterized by its thermal stability, ease of fabrication, and sustainability. These attributes make it an essential component across various industries, driving innovation and efficiency in product design and manufacturing.