Melissa 673-003 manual Permanent drain, Maintenance, Technical Specifications

Page 20

Permanent drain:

It is possible to have the water bypass the water tank and run straight to a drain. On the rear at the bottom (13 in illustration page

2)there is a pipe to which you can attach a hose to feed the water directly to the drain.

Remember to remove the stopper from the pipe.

We recommend emptying the tank completely in this way if it is to remain unused for a prolonged period.

Installation:

It is important that the device is positioned on a firm level surface well away from other objects. It must be at least 30 cm away from walls or other objects. The air outlet must not be covered.

Fitting the flexible hose

Movable:

Attach one end of the hose to the device. Fit the other adapter to the other end, and feed it out into the open.

Fixed installation:

Attach one end of the hose to the device. Attach the other fitting to the other end, and feed it through the wall and out into the open. When the device is not in use the hole can be covered by a lid (enclosed).

The flexible hose can stretch from 500 mm to 2000 mm. We recommend, however, keeping it as short as possible.

Do not overstretch the flexible hose.

Installation set for window

An adapter for fitting in a window is enclosed. This can be positioned either vertically or horizontally.

MAINTENANCE

Always remove the plug from the socket before cleaning. Do not use cleaning agents containing solvents.

Use a well-wrung damp cloth. Wipe off with a dry cloth.

The air filter:

The air filter should be cleaned at least once a fortnight.

To remove the air filter, open the grille at the side, where the filter is located in a special holder.

It can be cleaned by washing in hot water and a neutral cleaning agent.

Allow it to dry before replacing it in the device, but avoid drying it in direct sunlight.

Replace it in the filter holder and close the grille.

TECHNICAL SPECIFICATIONS

 

net. weight:

35.0 kg

measurements (HxWxD):

84.0x48.0x40.0 cm

power (max.):

1800 W

cooling capacity (max.):

14000 Btu

heating capacity (max.):

7000 Btu

airflow (max.):

360m3/hr

dehumidification capacity (max.):

2.8 L/hr

cooling refrigerant:

R407C

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 673-003 Mobil luftkonditioneringsapparat Namn PÅ Delar Sedd Framifrån Sedd BakifrånSäkerhetsåtgärder KontrollpanelFöre Användning Blåsfunktion Tryck på knappen Mode upprepade gånger tillsTillbehör Tekniska Specifikationer InstallationUnderhåll Felsökning OBS! Garantin Gäller Inte OMMiljötips Garantin Gäller Inte OMDele Sikkerheds ForanstaltningerFØR Brug UdblæsningsslangeRawlplugs Skruer Batterier Fjernbetjening Afløbsslange Maks. effektforbrug 1800 W / 9 a VedligeholdelseTekniske Specifikationer Importør ProblemløsningMiljø Tips Navn PÅ Deler SikkerhetsreglerTilbehør UtløpsslangePlugger Skruer Batterier Fjernkontroll Dreneringsslange FØR BrukInstallasjon Permanent dreneringVedlikehold Tekniske DataMiljøtips FeilsøkingGarantien Gjelder Ikke Käyttöpaneeli Laitteen OsatTurvatoimet Varusteet Muovitulpat Ruuvit Paristot Kaukosäädin TyhjennysletkuMaks. tehonkulutus 1800 W/9 a IlmasuodatinTekniset Ominaisuudet Vianmääritys YmpäristövinkkiTakuu EI OLE Voimassa MaahantuojaOperating Panel Safety PrecautionsNames of Parts Accessories Rawlplugs Screws Batteries Remote control Drainage hoseExhaust hose Before USEMaintenance Technical SpecificationsNet. weight 35.0 kg Measurements HxWxD Permanent drainTrouble Shooting NB! the Guarantee does not ApplyEnvironmental Advice Importer

673-003 specifications

Melissa 673-003 is an advanced synthetic material specifically designed for a range of high-performance applications. Engineered using innovative polymer technology, this unique product exhibits a combination of durability, flexibility, and resilience, which sets it apart from traditional materials. As industries continue to demand higher standards, Melissa 673-003 emerges as a preferred choice for manufacturers and designers alike.

One of the main features of Melissa 673-003 is its outstanding tensile strength. This characteristic allows the material to withstand significant stress and loads without compromising its structural integrity. The tensile strength ensures that products made from Melissa 673-003 can endure harsh environmental conditions, making it ideal for outdoor applications, automotive parts, and industrial machinery.

In addition to its strength, Melissa 673-003 boasts excellent thermal stability. This capability enables the material to maintain its performance across a broad temperature range. Whether exposed to extreme heat or cold, Melissa 673-003 remains reliable and effective, making it suitable for usage in electronics, aerospace, and other sectors that require materials to perform optimally under varying temperatures.

Another noteworthy characteristic is its resistance to chemical corrosion. Melissa 673-003 has been designed to withstand exposure to a wide range of chemicals, including acids, bases, and solvents. This feature ensures longevity and reliability, particularly in environments where traditional materials may degrade or fail.

Moreover, Melissa 673-003 is lightweight, which is an advantage in applications where reducing weight is critical, such as in the automotive and aerospace industries. The lightweight nature of the material also contributes to enhanced energy efficiency, paving the way for environmentally friendly designs.

In terms of technology, Melissa 673-003 incorporates advanced processing methods that allow for versatile applications. The material can be easily molded, extruded, and fabricated, enabling designers to create tailored solutions that meet specific needs. This adaptability makes it a suitable choice for various manufacturing processes, from injection molding to 3D printing.

Sustainability is also a key consideration in the development of Melissa 673-003. The material is produced with a focus on reducing environmental impact, utilizing eco-friendly practices throughout its lifecycle. As industries increasingly prioritize sustainability, Melissa 673-003 stands out as a responsible choice for manufacturers.

In summary, Melissa 673-003 is a cutting-edge synthetic material characterized by its impressive tensile strength, thermal stability, chemical resistance, lightweight nature, and versatility in fabrication. Its advanced technological features and commitment to sustainability make it a top choice for a variety of modern applications across multiple industries.
Top Page Image Contents