Melissa 640-171 manual Introduction, Safety Measures, KEY to Main Components of the Appliance, Use

Page 10

UK

INTRODUCTION

To get the best out of your new appliance, please read this user guide carefully before using it for the first time. Take particular note of the safety precautions. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.

SAFETY MEASURES

General

Incorrect use of this appliance may cause personal injury and damage.

Use for its intended purpose only. The manufacturer is not responsible for any injury or damage resulting from incorrect use or handling (see also Guarantee Terms).

For domestic use only. Not for outdoor or commercial use.

For connection to 230 V, 50 Hz only.

Do not immerse the appliance, cord or plug in water or any other liquid and make sure no water enters the appliance.

Never touch the appliance, cord or plug with wet or damp hands.

Do not expose to direct sunlight, high temperatures, humidity, dust or corrosive substances.

Never leave the appliance unattended when it is switched on.

Keep the appliance under constant supervision while in use. Keep an eye on children.

Do not use the appliance unless fitted with exhaust filter, motor filter and dust bag, as this could damage the appliance.

Only use accessories manufactured or recommended by the manufacturer.

Use

Do not use it on wet surfaces.

Take particular care when vacuuming stairs, due to the risk of falling.

Do not use the kit to vacuum up matches, hot ashes, cigarette butts, hard or sharp objects, wet or damp substances, combustible materials (petrol, solvents, etc.) or vapour from these.

Do not use to vacuum fine sand or dust – e.g. plaster, brick dust and the like.

Ensure that you keep clothing, hair and body parts away from the nozzle and moving parts of the appliance.

Never insert anything into the openings of the appliance.

Do not cover the appliance’s suction or exhaust port.

Cord and plug

Keep the cord and appliance away from heat sources, hot objects and naked flames.

Take care to prevent bending and kinking of the cord and avoid pulling the cord around sharp corners or jamming it in doors, etc.

Switch the appliance off and unplug it when it is not in use, and before you replace the dust bag and clean or replace the filters.

o Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.

o Keep hold of the plug when rewinding the cord, so that it does not strike the appliance or any other objects in the vicinity.

Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has been dropped or damaged in any other way.

If the appliance, cord or plug has been damaged, have them inspected and if necessary repaired by an authorised repairer. Never try to repair the appliance yourself. Please contact the store where you bought the appliance for repairs under the guarantee. Unauthorised repairs or modifications to the appliance will invalidate the guarantee.

KEY TO MAIN COMPONENTS OF THE APPLIANCE

1.Air valve

2.Handle

3.Hose

4.Lid

5.Hose connector port

6.Bag change indicator

7.Button for automatic cord rewind

8.Cord and plug

9.Carrying handle

10.Nozzle holder

11.Exhaust

12.On/Off button

13.2-piece pipe

14.Brush function button

15.Floor nozzle

16.Lock buttons

17.Hose connector

18.Exhaust filter sponge

19.Exhaust filter grille

20.Motor filter sponge

21.Motor filter holder

PREPARING THE APPLIANCE

IMPORTANT! Before using the

appliance for the first time, open the lid (4) and check that the motor filter (20-21), exhaust filter (18-19) and dust bag are fitted (see the sections on replacement of filters and dust bag below).

Attach the hose (3) to the appliance by inserting the hose connector (17) in the hole on the hose connector port (5) on the top of the appliance, until you hear a click.

o To remove the hose, press the lock buttons (16) on both sides of the hose connector and pull the hose out of the appliance.

Assemble the two pieces of the pipe (13).

Attach the handle (2) to one end of the pipe and attach the floor nozzle (15) to the other end of the pipe.

USE

Pull the cord (8) out of the appliance. The cord must not be pulled out any further than the red mark. Plug in and switch on the power.

Press the On/Off button (12) to start and stop the appliance.

While in use, the suction force can be regulated by opening and closing the air valve (1) on the handle.

o When the valve is closed, full suction is achieved. This is the normal setting. o When the vent opens, more air is allowed in, reducing the suction power at the floor nozzle. This function is ideal for cleaning curtains and other light

items which can get sucked into the nozzle.

The floor nozzle bristles have two settings which can be selected using the brush function button (14) on top of the nozzle.

o When cleaning hard surfaces (stone flooring, tiles, etc.), the nozzle brushes should be extended.

o When cleaning carpets and rugs, the brushes should be retracted into the nozzle.

The bag change indicator (6) will normally be dark blue. If it changes to orange when the vacuum cleaner is in use, or if the suction strength is significantly reduced, the dust bag must be replaced (refer to Replacing dust bag below). If the indicator remains orange after the bag has been replaced, it may be due to one of the following reasons:

o The hose or nozzle is clogged. o The exhaust filter is dirty.

Investigate what is causing the indicator to remain orange and deal with the problem. The appliance must not be used if the indicator is orange. This may cause irreparable damage to the motor.

NOTE! The appliance switches off automatically if the motor overheats. Switch off the appliance on the On/Off button, disconnect the plug from the mains socket and allow the appliance to cool off for approx. 1 hour. Clean the filters and replace the dust bag (see the sections on replacement of filters and dust bag below), before using the appliance again.

Tips

If you need to take a break from vacuum cleaning, place the nozzle in the nozzle holder at the back of the appliance (10) or in the equivalent bracket on the bottom of the appliance.

You can lift and carry the appliance using the carrying handle (9). Never pull or lift the appliance by the cord.

10

Image 10
Contents 640-171 Oversigt Over Apparatets Dele IntroduktionSikkerhedsforanstaltninger Klargøring AF ApparatetUdskiftning AF Udblæsningsfilter Udskiftning AF StøvposeUdskiftning AF Motorfilter OpbevaringFöre Första Användningstillfället SäkerhetsåtgärderBeskrivning AV Apparatens Delar AnvändningByta Utblåsfilter Byta DammpåseByta Motorfilter FörvaringOversikt Over Apparatets Deler InnledningSikkerhetsregler Klargjøring AV ApparatetSkifte Utblåsingsfilter Skifte StøvposenSkifte Motorfilteret OppbevaringLaitteen Pääosat JohdantoTurvallisuustoimenpiteet Laitteen ValmisteluPoistoilman Suodattimen Vaihtaminen Pölypussin VaihtaminenMoottorin Suodattimen Vaihtaminen SäilytysKEY to Main Components of the Appliance Safety MeasuresIntroduction Preparing the ApplianceFrequently Asked Questions CleaningGuarantee Terms Replacing the Dust BAGDIE Wichtigsten Teile DES Gerätes EinleitungSicherheitshinweise VOR DEM GebrauchWechseln DES Abluftfilters Wechseln DES StaubbeutelsWechseln DES Motorfilters AufbewahrungWstęp Importer

640-171 specifications

Melissa 640-171 is a cutting-edge platform designed to enhance business process automation and streamline operations across various industries. This innovative solution is aimed at organizations that seek to improve efficiency, reduce operational costs, and ensure superior data management.

One of the main features of Melissa 640-171 is its advanced data quality capabilities. The platform employs sophisticated algorithms to clean, standardize, and enrich data, securing the accuracy and reliability of information across business systems. This is particularly vital for companies that rely heavily on customer data and analytics, as high-quality data leads to better decision-making and strategic planning.

Another notable characteristic of Melissa 640-171 is its seamless integration with popular CRM platforms, email marketing tools, and e-commerce systems. This ensures that businesses can leverage their existing technologies without the need for extensive overhauls or costly migrations. The ease of integration makes it an attractive choice for businesses that want to enhance their data management without disrupting current workflows.

Melissa 640-171 also emphasizes user-friendly design and accessibility. Its intuitive interface allows users of all skill levels to navigate the platform efficiently and utilize its features without extensive training. Moreover, the system is cloud-based, providing users with the flexibility to access data from anywhere, at any time, which increases collaboration and productivity in increasingly remote work environments.

In terms of security, Melissa 640-171 adopts industry-leading measures to protect sensitive data. It employs robust encryption protocols and adheres to regulatory compliance standards, ensuring that businesses can handle customer information safely and responsibly.

Additional technologies embedded in Melissa 640-171 include machine learning and artificial intelligence. These technologies enable predictive analytics and automate routine tasks, which not only saves time but also reduces the risk of human error. As the platform learns from data patterns, it continuously improves its capabilities, allowing businesses to stay adaptive in a rapidly changing market.

Overall, Melissa 640-171 stands out as a comprehensive solution designed to empower organizations. Its combination of data quality management, seamless integrations, user-friendly interface, and advanced technologies makes it an ideal choice for businesses looking to enhance their operational efficiency and data-driven decision-making. With its strong focus on security and adaptability, Melissa 640-171 positions itself as a key player in the realm of business process automation.