Marmitek CM15PRO Programmable Computer Interface + ActiveHome Pro Software, Order information

Programmable Computer Interface + ActiveHome Pro™ Software

DIMMER / APPLIANCE MODULE* REMOTE CONTROL* CM15Pro COMPUTER INTERFACE PC*

* not included

Technical data CM15Pro

Power:	230 VAC 50 Hz, 7 Watt
Backup battery:	1x 9V alkaline block battery
Backup time:	1 week
Supply current :	<30 mA
X-10 Powerline:	120 kHz ± 2 kHz / 2.5 Vpk-pk
Signal sensitivity:	15 mVpp min, 50 mVpp max at 120 kHz
Signal / noise ratio:	1,35 : 1
X-10 transmission:	1 pulse burst at 0, 60 and 120 degrees.
X-10 Key codes it can transmit: All units Off, All Lights On, On, Off, Dim,
	Bright, All Lights Off, Extended Code 1 type 0,
	Extended Code 1 type 3, Hail Acknowledge,
	Pre-Set Dim, Status Request, RF commands
X-10 Key codes to respond to: All units Off, All Lights On, On, Off, Dim,
	Bright, All Lights Off, Extended Code 1 type 3,
	Hail Request, Pre-Set Dim, Status Request,
	RF commands
X-10 Collision detection:	Present
Input impedance:	> 180 Ohm (P-N) at 120 kHz
RF Range:	30 meters (note: the unit should be mounted
	at a height of 1metre for best performance
	and located away from any sources of RF
	interference such as computers, monitors, etc).
RF Power:	10 mW (maximum)
RF receiver frequency:	433,92 MHz
RF transmitter frequency:	433,92 MHz
Ambient temperature:	-10°C to +50°C (operation) -20°C to +70°C (storage)
Dimensions (mm):	66.7 (w) x 113.5 (L) x 45.3 (H)

Order information

CM15Pro™	EU version	Art.nr. 9793
	UK version	Art.nr. 9800
Giftbox	Size (LxWxH)	180x74x144mm

System requirements

Windows based Personal Computer

Available USB port

CD ROM or DVD player

Windows XP or Windows Vista operating system

Set includes

1x CM15Pro™ 1x Marmitek X-10 ActiveHomePro™ Software

ProgrammableEnglish

Computer Interface

(9V battery included)

1x USB cable	1x Quick intallation manual
2 metre	English, Deutsch, Français,
	Español, Italiano, Nederlands.

Also available

SC9000 Security Console	MS13 Wireless motion sensor
to integrate your Home Automation	to activate your Home Automation by
with your security system.	motion detection. Art.nr 09053
BE:09599 - DE:09597 - EU:09584
FR:09598 - NL:09596 - UK:09600

LM12 Lamp/Dimmer Module	AM12 Appliance / Switch Module
to switch or dim lights with your	to switch appliances with your
computer interface. G: 08910 - U:08977	computer interface. G:08915 - U:08978
I:09051 - F:08911 - CH:09248	I:09052 - F:08916 - CH:09249

AW12 MicroModule	LW11 Wall Mounted Dimmer
to make your Home Automation system	to make your Home Automation system
invisible. Art.nr. 09463	invisible. EU: 08930

www.marmitek.com

© M A R M I T E K 2 2 7 3 4 / 2 0 0 8 010 7