Caring for your Pyle Pro Amplifier
Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use:
•Keep the amplifier dry. If it gets wet, wipe immediately.
•Use the amplifier only in
•Handle the amplifier gently and carefully - do not drop!
•Keep the amplifier away from dust and dirt.
•Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemicals, solvents or detergents!
Resetting the circuit breaker
This amplifier employs a circuit breaker for protection from power surges and short circuits. If the amplifier suddenly turns off or will not turn on, check the circuit breaker. If it is tripped, check and correct for a short or overload condition. Wait for the amplifier to cool, then press the circuit breaker RESET button on the back of the amplifier.
Resetting the circuit breaker
This amplifier employs a circuit breaker for protection from power surges and short circuits. If the amplifier suddenly turns off or will not turn on, check the circuit breaker. If it is tripped, check and correct for a short or overload condition. Wait for the amplifier to cool, then press the circuit breaker RESET button on the back of the amplifier.
Limited Warranty
All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchaser of the amplifier.
Should the unit fail due to factory defects in material or workmanship, your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return Hotline at (718)
When returning the unit to us for warranty service, it must be carefully packed and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
•A copy of your sales receipt or other proof of purchase
•A brief letter, indicating the problem you are experiencing with the product
•Include in your letter your return address, daytime phone number and R.A. number
•Also include a check or money order for $15.00 for return shipping, handling and insurance, or provide your Visa/MC number with expiration date.
Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid. This warranty will be considered void if the unit was tampered with, improperly serviced or subject to misuse, neglect or accidental damage.
Amplifier Specifications | PZR600 | PZR1000 | |
Input Impedance, balanced (unbalanced) | 20 | 20 | |
|
|
| |
Continuous Output Power |
|
| |
Stereo Mode |
| 70W x 2 | 170W x 2 |
20 Hz to 20 kHz, 8 Ohms |
| ||
1 kHz, 4 Ohms |
| 100W x 2 | 220W x 2 |
Maximum Power, 8 Ohms |
| 110W x 2 | 230W x 2 |
Maximum Power, 4 Ohms |
| 130W x 2 | 260W x 2 |
Peak Power, 8 Ohms |
| 600W x 2 | 1400W x 2 |
|
|
|
|
Bridged Mode |
| 140W x 1 | 440W x 1 |
20 Hz to 20 kHz, 8 Ohms |
| ||
1 kHz, 8 Ohms |
| 140W x 1 | 880W x 1 |
Peak Power |
| 1200W x 1 | 2800W x 1 |
|
|
| |
THD at rated output power | 0.1% | 0.1% | |
|
|
|
|
Frequency Response | +/– 3 dB | 10 Hz to 50 kHz | 10 Hz to 50 kHz |
|
|
| |
Input Sensitivity for rated output power | 1.0V | 1.0V | |
|
|
|
|
100 dB | 100 dB | ||
|
|
|
|
Speaker Impedance |
| ||
Stereo |
| ||
Bridged |
| ||
|
|
|
|
Power Requirement |
| 120 VAC, 60 Hz / 230 VAC, 50 Hz | 120 VAC, 60 Hz / 230 VAC, 50 Hz |
|
|
| |
Dimensions H x W x D, inches | 3 15/32 x 19 x 10 11/16 | 3 15/32 x 19 x 10 11/16 | |
(mm) |
| (88 x 482 x 271) | (88 x 482 x 271) |
Weight, lbs (kg) |
| 16.7 (7.6) | 20.5 (9.3) |
|
|
|
|
4 – PYLE PRO PZR600/1000 Amplifier Owner’s Manual