M-Audio Mastering the LSBBank Function and MIDI Controller Management
Page 10

Oxygen Keyboard Line User Guide

Control Select

The Control Select function selects a MIDI controller for parameter editing. Use the Control Select function to select a MIDI controller before assigning a MIDI CC number to that controller.

To select a MIDI controller for editing, move the knob or fader that you want to edit. The last used controller is always the controller that is currently selected for editing.

The second method to select a MIDI controller for editing:

1.Press the Advanced Function button

2.Press the Control Select button

3.Enter the controller’s ID number using the data entry keys.

4.Press the Enter key to confirm.

Note: If you move a controller after pressing Control Select, the LED will display the ID number of the selected controller to edit. The ID number of each controller is shown on the printing by each control.

Program

The Program function is used to send a Program Change on the Global Channel. To send a Program Change:

1.Press the Advanced Function button.

2.Press the Program key.

3.Enter the Program Change to send using the data entry keys.

4.Press the Enter key to confirm.

Note that it is also possible to set the data keys to control Program Change. To do this:

1.Press the Select Function button until the dot above Prog is lit.

2.Use the - and + Data buttons to step through Program Changes. The Program Change number shown in the LED display will be sent.

Bank LSB

The Bank LSB function can be used to access additional banks of sounds on your sound module or sound card by sending a bank change LSB message. Note, this is only possible if your receiving device has additional banks of sounds.

1.Press the Advanced button.

2.Press the Bank LSB key.

3.Enter the bank number using the keypad.

4.Press the Enter key.

Please check your receiving device’s documentation to ensure that it will respond to these messages.

The Bank MSB message is always sent on the Global Channel.

Bank MSB

The Bank MSB function can be used to access additional banks of sounds on your sound module or sound card by sending a bank change MSB message. Note: this is only possible if your receiving device has additional banks of sounds.

1.Press the Advanced button.

2.Press the Bank MSB key.

3.Enter the bank number using the keypad.

4.Press the Enter key.

Please check your receiving device’s documentation to ensure that it will respond to these messages.

The Bank MSB message is always sent on the Global Channel.

Data 1

The Data 1 function key only applies to the unit’s programmable buttons and pedal. The function of Data 1 depends on the MIDI CC that is currently assigned to the controller that is to be edited. Please refer to Appendix A where each assignable MIDI CC is listed, along with the Data 1, 2 and 3 functions.

When editing Data 1 values, the range of values that can be selected is 0-127.

English

11

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Oxygen Series › What’s in the Box › Features› Introduction Top PanelWindows › Minimum System RequirementsGeneral Mac OSPower and Connection via USB › Driver Installation and Powering the Keyboard› Controls and Connectors Top Panel DescriptionsFunction Buttons Octave +/- and Transpose ButtonsLED Screen Assignable Midi Sliders 49- and 61- Note OnlyBack Panel Descriptions › Introduction to Midi Programming Functions Testing Your Oxygen keyboard with Your Computer SoftwareEdit Mode Introduction› Function Buttons Defined Global Channel › Keybed Functions DefinedControl Assign Channel AssignBank LSB Control SelectProgram Bank MSBTo assign minimum value to a button This mode is controlled as followsTo assign maximum value to a knob or fader Device ID 49- and 61-note only Drawbar Mode 49- and 61-note onlyVelocity Curve On the Oxygen keyboardStore Cancel KeyMemory Dump Enter KeyIntroduction to Programming Options 10 › Advanced Programming FunctionsFaders and Rotary Dials Buttons and Pedal Midi CCSetting Toggle Values for the Buttons or Pedal Setting Trigger Values for the Buttons or PedalAssigning RPN/NRPN to a Fader/Rotary Controller Assigning MMC Control to a ButtonAssigning a Note to a Button Programming a Button to Increment/Decrement a Midi CC value Setting Buttons as Program, Bank TriggersTo set up a button in this way About SysEx Messages and Device IDNon-Volatile Memory Returning to the Factory Default Setting11 › Midi Messages Defined Assigning the Device ID not available on 25-note modelRPN/NRPNs 12 › TroubleshootingSysEx 13 › Contact M-Audio Technical SupportWarranty Terms Warranty Registration 15 › Warranty Terms and Registration14 › Technical Info Faders and Rotary Dials 16 › AppendixesAppendix a Assignable Midi CC’s Buttons and PedalAppendix B Hexadecimal Conversion Chart Hexadecimal to Decimal Conversion ChartAppendix C Useful Midi Data Midi Note NumbersAppendix D Standard Midi Controller numbers Midi CCsReverb Types Appendix F General Midi Reverb and Chorus TypesChorus Types

OXYGEN 8 V2 specifications

The M-Audio OXYGEN 8 V2 is a compact, highly versatile MIDI controller designed to enhance the creative workflow of musicians and producers. Its portable design, combined with an array of features, makes it a perfect choice for both studio and live performance settings.

One of the standout characteristics of the OXYGEN 8 V2 is its 32 velocity-sensitive keys. These mini keys provide a responsive playing experience, allowing for expressive performances that can capture the nuances of each note. The velocity sensitivity means that the harder you play, the louder the sound, which is particularly beneficial for expressive playing styles.

Another significant feature of the OXYGEN 8 V2 is its bank of eight assignable knobs. These knobs can be mapped to various parameters within your DAW or virtual instruments, enabling you to control volume levels, pan settings, or any other parameter at your fingertips. This level of customization allows musicians to tailor the controller to their specific workflow and preferences.

The controller also includes eight backlit drum pads that are perfect for finger drumming, triggering samples, or launching clips in performance settings. These pads are sensitive to pressure, providing dynamic control over MIDI notes for rhythmic play. The ability to assign different functions to these pads makes them a versatile tool for live performances and studio compositions alike.

The OXYGEN 8 V2 features a transport control section that allows for seamless interaction with your DAW. With buttons for play, stop, record, and more, you can easily navigate your sessions without having to reach for your mouse, streamlining the creative process.

With USB bus power, the M-Audio OXYGEN 8 V2 eliminates the need for an external power supply, making it ideal for mobile musicians and producers. The plug-and-play capability ensures that it is compatible with most major DAWs on the market, including Ableton Live, Pro Tools, and Logic Pro, allowing for quick setup.

Combining portability, versatility, and functionality, the M-Audio OXYGEN 8 V2 is an excellent tool for any musician looking to enhance their production and performance capabilities. Whether you are a beginner or an experienced professional, this controller supports a wide range of creative possibilities, making it a valuable addition to any musical setup.
Top Page Image Contents