Kambrook KBV250, KBV280, KBV220 manual Care and Maintenance, Emptying the Dust Container

Care and Maintenance

Check all filters and replace them regularly. It is recommended to clean the filters after every use. For normal household vacuuming the filters should be replaced at least twice a year.

If you encounter reduced vacuum cleaner performance, check:

•Dust capacity in dust container

•All filters, including dust, motor and exhaust. Any clogging in the filters will reduce the efficiency of your vacuum cleaner

To clean the outside of the unit, wipe the exterior with a soft, damp cloth. Never use an abrasive cleaner.

Emptying the Dust Container

Fig. 7

Fig. 8

To remove the dust container, ensure the vacuum is down on its wheels; remove the dust container by pressing down on the button on top of the dust container. Once released carefully lift the container upwards.

Fig. 9

Always switch the vacuum off, then switch off at the power outlet and unplug prior to replacing filters or emptying the dust container.

For optimum use, the dust container should be emptied after every use. When the dust container reaches the capacity mark ‘MAX’, it is essential to thoroughly clean both the dust container and filters.

NOTE: Dependant upon the amount and type of dirt collected in the dust container, it may be necessary to agitate the dirt inside the dust container for easier dispensing.

IMPORTANT: Do not use the unit without a dust container in place.

9

KBV250-220-280_IB_B11.indd 9 23/08/11 10:12 AM