41/4 Phone Jack | PYLE Audio PTAU34 guide

FEATURES AND CONTROLS

(1)Blue LED Output Level Display

(2)Power On/Off and LED Indicator

Main power switch, the indicator lights when the amplifier is turned on.

(3)USB 2.0 Input Interface with LED Indicator

Press to play the last song backward, press to play the next song forward, and press to play and/or pause the song. When the song is ceased from playing, it will be memorized to resume once the amplifier is reactivated and/or the USB input is selected again.

(4)1/4" PHONE Jack

Accepts headphones with 1/4" plug.

(5)MIC Volume Control

Lets you adjust the volume of connected MIC to the proper setting.

(6)MASTER Volume Control

Lets you control the overall volume level. It doesn't affect the volume of MIC.

(7)BALANCE Control

Lets you adjust the sound balance between the left and right of amplifier outputs.

(8)BASS and TREBLE Control

Allows you to boost or attenuate bass and treble for the desired sound.

(9)AUX 1/AUX 2/CD/USB Input Selector

Lets you select the desired input music source. When it is switched to AUX1, AUX2, or CD input while the USB is still on playing, the playing signal of USB continues, just it is not sent to the amplifier's output.

(10)Switchable MIC PAGER and MIXING Modes

Set to PAGER, the signal from AUX 1/AUX 2/CD will be attenuated BY -12dB and the signal from MIC will override to page (Auto Talkover), it is good for paging system. Set to MIXING, the signals from

AUX 1/AUX 2/CD and MIC will be existed at the same time, it acts like playing at KARAOKE event.

(11)1/4" MIC Input Jack

Lets you connect a microphone with a 1/4" plug.

(12)AUX 1/AUX 2/CD RCA Inputs

Lets you connect most high level audio sources such as CD player, tape deck, tuner, camcorder, or VCR.

(13)REC RCA Output

Lets you connect the amplifier to a tape deck for recording.

(14)Push Type Speaker Terminal

Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from 4 to 8 Ohms for the general stereo output. The total speaker impedance must be at least 4-Ohm per channel at stereo mode.

(15)110/220 Voltage Selector

This amplifier has selectable input voltage from 110V/60Hz (the standard in USA and CANADA) to 220V/50Hz (for EUROPEAN operation). Please make sure the switch is in the proper position before operating, otherwise, the severe damage will be incurred and not covered by the warranty.

(16)Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and if necessary replace it with a 1.5-amp, 250-volt, fast-acting, 5x20mm fuse (not supplied).

3 - Pyle Pro PTAU34 Manual

PTAU34 specifications

The PYLE Audio PTAU34 is a compact yet powerful stereo amplifier designed to enhance audio experiences in various settings, from home entertainment systems to garage workshops. With a robust functionality, this amplifier is an excellent choice for users looking to elevate their audio quality without the hassles typically associated with larger units.

One of the standout features of the PTAU34 is its impressive power output. With 50 watts per channel at 4 ohms, it can easily drive speakers for vibrant sound performance, making it suitable for small to medium-sized rooms. The amplifier also supports a variety of speaker configurations, allowing users to connect multiple speakers for an immersive audio experience.

The PTAU34 is equipped with Bluetooth technology, enabling wireless streaming from compatible devices. This feature allows users to play their favorite music, podcasts, or audiobooks effortlessly, making it a perfect addition for modern audio setups. The amplifier's Bluetooth range is competitive, ensuring stable connections even from a distance.

In addition to Bluetooth, the PTAU34 offers multiple input options, including RCA, AUX, and USB connectivity. This versatility makes it easy to connect various audio sources, such as CD players, smartphones, and computers. The front panel features intuitive controls for adjusting volume, treble, and bass settings, giving users the ability to customize their audio output to fit their preferences.

The build quality of the PTAU34 is noteworthy. The amplifier is designed with a solid construction, ensuring its durability over time. The sleek and compact design means it can fit easily into tight spaces without sacrificing performance.

PYLE also incorporates protective circuitry in the PTAU34, which guards against overheating and short circuits, enhancing the amplifier's longevity and performance reliability.

In summary, the PYLE Audio PTAU34 stands out as a versatile and powerful audio amplifier. Its combination of Bluetooth connectivity, multiple input options, and dynamic audio performance makes it an excellent choice for anyone looking to upgrade their sound system. Whether for casual listening or more serious audio endeavors, the PTAU34 is designed to deliver a high-quality listening experience.