KitchenAid undermount Sinks Installation requirements, Tools and Parts, Plumbing requirements

Page 2

Installation requirements...

The KitchenAid™ Undermount System is based on installing Undermount Series sinks, including the plywood reinforcement sheet (sink support), with the countertop at the fabricator’s shop.

Tools and Parts:

Assemble the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Check local codes. All plumbing connections should be made by a licensed, qualified plumber.

Installation must be performed by a qualified fabricator/ installer. The sink installation must comply with national and local plumbing codes and ordinances.

If more holes are required in the sink deck, the holes must be added by a qualified plumber according to the faucet manufacturer’s specifications.

Parts supplied:

sink

sink template (Masonite)

Installation Instructions/Use and Care Guide

Tools needed:

drill

5/16” drill bit

clamps

4, 1/2" Phillips flathead screws

dust mask

tape measure

solvent, such as denatured alcohol

Parts and Materials needed:

• 1/2" plywood sheets

silicone sealant*

router

3/8" router guide bushing

1-3/16" router guide bushing

1/4” straight cutter bit

1/2” straight cutter bit

#2 Phillips screwdriver

Additional Resources available:

CNC program download - sink template/cut-out dimensions (see “Create Template”section).

Plumbing requirements

Sink should be plumbed to local plumbing codes.

All plumbing connections should be made by licensed, qualified plumbers.

Countertop requirements

This undermount sink is intended to be installed with solid

faucet with check valve and accompanying plumbing supplies as needed.

strainer basket

*Silicone caulk/sealant must meet the qualifications of ASTM C920, FDA regulation no. 21, CFR 177.2600, NSF-51, Dow Corning® 786 is recommended.

surfaces only.

These instructions are intended for use by qualified fabricators and installers only.

2

Image 2
Contents Installation Instructions Use & Care Guide Plumbing requirements Installation requirementsTools and Parts Countertop requirementsCreate Female Template Installation InstructionsCreate female template Cut Out CountertopCut out countertop Install undermount sinkCreate sink support Warranty Use & Care GuideFor further assistance Requesting Assistance or ServiceIf you need assistance or service in U.S.A Our consultants provide assistance with

undermount Sinks specifications

KitchenAid undermount sinks are a popular choice for modern kitchens, combining both functionality and aesthetic appeal. Designed to integrate seamlessly with your countertop, these sinks offer a clean, streamlined look that enhances the overall appearance of your culinary space.

One of the standout features of KitchenAid undermount sinks is their durable construction. Made from high-quality materials such as stainless steel, cast iron, and fireclay, these sinks are built to withstand the rigors of everyday cooking and cleaning. Stainless steel options are particularly favored for their resistance to rust and stains, while cast iron and fireclay models provide an elegant, traditional look that's both timeless and functional.

Another key characteristic of KitchenAid undermount sinks is their spacious designs. Many models offer large basins, providing ample space for washing large pots, pans, and baking sheets. This spaciousness not only facilitates better functionality but also helps keep the kitchen organized, as dishes can be stacked and rinsed before being placed in the dishwasher.

KitchenAid is known for incorporating innovative technologies into their products, and their undermount sinks are no exception. Some models come equipped with sound-dampening features, which significantly reduce noise from running water and clanging utensils. Additionally, many sinks include a special finish that makes them easy to clean and maintain, ensuring that your sink remains looking new for years to come.

Another notable feature of KitchenAid undermount sinks is their versatility in design. These sinks come in various styles and configurations, including single and double bowl options. This versatility allows homeowners to choose a sink that best fits their needs and complements their kitchen décor, whether they prefer a sleek modern aesthetic or a more rustic, traditional look.

Moreover, KitchenAid offers thoughtful accessories designed to enhance the functionality of their undermount sinks. These can include sink grids to protect the bottom of the basin, cutting boards that fit perfectly over the sink, and colanders for easy food prep.

Overall, KitchenAid undermount sinks combine style, durability, and innovative features to create a product that meets the demands of modern kitchens, allowing for both efficiency and elegance in your cooking space.